I installed the oh323 channel driver and registered to the gate keeper succesfully.
I come through the GK, ring the dialed number for about 0.5 seconds and loose the line. I contacted the GK and they report that they receive the correct dialstring to route the call but the call is ended by my side.
The dialstring looks like this:
exten => _.,1,Dial(OH323/${EXTEN},60,r)
I use the following channel driver:
asterisk-oh323-0.7.1
openh323-Janus_patch4-src
pwlib-Janus_patch4-src
and the message on asterisk console looks like this:
-- Registered with gatekeeper '[EMAIL PROTECTED]'.
-- Executing Dial("SIP/2000-c9fc", "OH323/0012029361212|60|r") in new stack
-- H.323 call to 0012029361212 with codec(s) g729
-- Called 0012029361212
-- H.323 call 'ip$localhost/2209' cleared, reason 8 (Transport failure)
-- OH323/L2209 is circuit-busy
-- Hungup 'OH323/L2209'
== Everyone is busy/congested at this time (1:0/1/0)
== Auto fallthrough, channel 'SIP/2000-c9fc' status is 'CONGESTION'
-- Executing Dial("SIP/2000-c9fc", "OH323/h|60|r") in new stack
-- H.323 call to h with codec(s) g729
-- Called h
-- Hungup 'OH323/L2210'
== Spawn extension (local, h, 1) exited non-zero on 'SIP/2000-c9fc'
-- H.323 call 'ip$localhost/2210' cleared, reason 1 (Cleared by local user)
My oh323 configuration:
Configuration of
OpenH323 channel
driver
------------------------------------------
Version:
0.7.1
Listening on address: 0.0.0.0:1720
Gatekeeper used: [EMAIL PROTECTED]
(Registered)
FastStart/H245Tunnelling/H245inSetup: OFF/ON/ON
Supported
formats in pref. order: g729<0>
Jitter buffer limits (min/max): 20-100
ms
TCP port range: 5000 - 31000
UDP (RAS) port range: 5000 - 31000
UDP
(RTP) port range: 10000 - 20000
IP Type-of-Service value: 0
User input
mode: 2
Max number of inbound H.323 calls: 10
Max number of outbound H.323
calls: 10
Max number of simultaneous H.323 calls: 20
Max call rate
(ingress direction): 1.00/30
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
