The exact rtp port to be used by each sip device never became a standard in the rfc, so each vendor is allowed to chose whatever udp port range they felt like using as their default.
Opening udp ports from 1024 to 64000 will likely help, but you might as well dump the firewall if you're going to open everything like that.
Also note that each line/conversation will use another udp port. So, in the case of the xten product, the first line/conversation may use port 8000. If you put that line on hold and start another (second) rtp session, that line/conversation will use something like 8002 (or whatever).
Thanks for all the replies. I did manage to get it working now but do not feel very comfortable will all the ports that must be opened.
Thanks again! Remco _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
