|
Hi Guys I have been running a test system of asterisk on a PIII 550
machine and now I want to implement it. I have a digium TDM02B card. I am
running on Mandrake 10.1. I have now moved it to a PIII 1.2 backplane server
and now I cant get the wcfxs module to load. I have also tried wctdm. I did all
the udev mods and the install didn’t have any errors. I am currently
running * v1.0.7 stable. I have googled and have not come up with anything concrete. Error
is as follows: ZT_CHANCONFIG failed on channel 4: No such device or address (6).
I only have 1 FXO module in at the moment, and have moved it through all the positions.
Does the card need the power in the back to correctly
start it? Kind Regards Terry Wade Office: +27 11
784-7642 Fax: +27 11
388-0855 Disclaimer
and Confidentiality Warning This
message is intended for the addressee only. If you are not the intended
recipient of this message, you are notified that any distribution, use of or
copying of this communication is strictly prohibited. If you have received the
communication in error, please notify the sender immediately. The views and
opinions expressed in this message are those of the individual sender of this
message and do not necessarily represent the views and opinions of ActiCom.
Consequently, ActiCom does not accept responsibility for such views and
opinions and this message should not be read as representing the views and
opinions of ActiCom without subsequent written confirmation. Each page attached
hereto must also be read in conjunction with this disclaimer. |
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
