It Stuart...Wonder if We're long lost cousins or something...Name here is Bill Ford...
Anyway...It sounds like a "mechanical" problem. Maybe something as simple as dirty contacts on the RJ-11 on the X100P. You say you've checked the line...but have you replaced the cable from the demark to the server....You might try pulling the X100 and reseating it, also clean the contacts on the card's rj. On Apr 9, 2005 8:56 AM, Stuart Ford <[EMAIL PROTECTED]> wrote: > Dear all ... > > I'm experiencing terrible trouble with crackling and noise on an > analogue line connected to an X100P (compatible) card. I've checked the > line with a normal analogue phone and it works fine, clear as a bell, > but any outgoing or incoming calls to Asterisk are almost completely > drowned out by loud crackling. > > I've attempted to adjust the RX and TX gains, but to no avail. There's > also an echo, but only one way. I'm assuming this is a separate issue so > I've not done much to investigate that, but I may be wrong so if it is > related does anyone have any suggestions? > > I never had this trouble with ISDN, but then I wouldn't would I? :) > > If anyone can wave a magic wand, or at the very least point me to a > website where I can get my own magic wand, please let me know. > > Thanks > > Stuart > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
