On Mon, 18 Apr 2005, Joe Dennick wrote: > You can use the same six lines for both inbound and outbound calling > just like you do now. The 'roll-over' will start on line 1 and move up. > You'll have to configure your outbound calls to start on line 6 and move > down. If you ever get to the point where all six are consumed, you'll > want to expand.
What's the reason for configuring the outbound zap group in reverse order of the incoming rollover? > You probably can NOT use the existing Meridian phones because they are > digital phone sets, not standard analog ones. You can purchase 5 > TDM400P cards (assuming you have 5 available PCI slots in your Asterisk > Server), and configure two with FXO ports (making 8 total) for the POTS > lines and the other three with FXS ports (making 12 total) to connect to > regular analog phone lines. I'd be a little worried about the 5000 interrupts/s those boards would generate. Are people actually running systems with that many wcfxs cards? ---------------------------------------------------------------------- Jon Lewis | I route Senior Network Engineer | therefore you are Atlantic Net | _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________ _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users