On April 22, 2005 11:48 am, Mark Phillips wrote: > Nothing happens. I get the same (non)error. > I get plenty of output when receiving a call however.
Odd... Here is my zapata.conf setup for my PRI: ----------------------- [channels] context=BellPRI switchtype=national pridialplan=unknown priindication=outofband overlapdial=no signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=no relaxdtmf=no group=1 callgroup=1 pickupgroup=1 immediate=no callerid=asreceived channel => 1-23 ----------------------- I simply Dial(Zap/g1/5551212). The fact that it doesn't think it can pick up a channel is interesting, I haven't run across that before. Combined with the fact that you can receive calls just fine, this is a very strange little problem. With my config (modified for your switchtype and context ONLY), what do you get when you try to dial a number? -A. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
