Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??

Fri, 22 Apr 2005 20:10:00 -0700

Hello Henry
e&m=1-23 should be bchan=1-23
you have it set for analog
also
signaling=pri_cpe


Henry Devito wrote:
Don't you need one of these directives so the PRI knows which is master and which is slave?
 
  • pri_cpe: PRI signaling, CPE side
  • pri_net: PRI signaling, Network side
    •  
    Henry
    ----- Original Message -----
    Sent: Friday, April 22, 2005 11:01 AM
    Subject: [Asterisk-Users] TE11OP -> Mitel 200Sx??

    Hello all. I just received a TE110P and am trying to hook it to my Mitel 200SX has anyone successfully done this? My configuration is as follows.

     

    Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card.

     

    All I get is a blinking yellow on my TE110P card and an alarm on my Mitel. T1 card.

     

    Any advice would be great.

     

    Zaptel.conf

    span=1,0,1,d4,ami

    e&m=1-23

    dchan=24

     

    Zapata.conf

    signalling=em_w

    switchtype=dms100

    echocancel=yes

    echocancelwhenbridged=yes

    echotraining=400

    callerid=asreceived

    group=1

    context=default

    channel => 1-23

     

    _______________________________________________
    Asterisk-Users mailing list
    [email protected]
    http://lists.digium.com/mailman/listinfo/asterisk-users
    To UNSUBSCRIBE or update options visit:
       http://lists.digium.com/mailman/listinfo/asterisk-users
    
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

    


    _______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

    Reply via email to