thanks info and suggestion we have a plain old PBX DID trunk from our telco will try to get more information about the trunk meanwhile I tried as documented in my zapata.conf:
; JNA tried all below - and even NO signaling same resuts
;Apr 24 21:11:15 WARNING[4430]: chan_zap.c:10198 setup_zap: Ignoring :signalling
;-- Reconfigured channel 1, Feature Group B (MF) signalling
; etc.
;
;signalling=featb
:signalling=em_w
;signalling=sf_featb
;signalling=sf_featdmf
;signalling=sf
jltaylor wrote:
If Feature Group B signaling is working properly (and you have Feature Group B trunks), then to reach your Asterisk box you would dial from the PSTN (1)+950+WXXX {W is 1 or 0 based on the number assigned to you}.
If you are dialing "out" {terminating where you look like the carrier} on FGB then it depends on if you are connected to an Equal Access End Office or a Access Tandem.
Are you sure about the Feature Group B thing or do you have trunks that just require MF signaling?
If you want MF, you might try the "featdmf" setting, however, the telco needs to know that you want FGD. AND... If you are connecting to an Access Tandem instead of and End Office, then the "featdmf" in Asterisk will not work. I have submitted a request for a quote to Digium to modify the code to make this work properly.
Likewise, true FGB "terminating" (where it looks like you are the carrier) works through an Access Tandem and the additional code is missing for that also.
Take out the featb and add: em_w
This will let you see if just plain old DTMF works.
James Taylor 903-793-1956
-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.18 - Release Date: 4/19/2005
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
