Normally, "plain old PBX DID trunks" are em_w (dtmf). Strange, the only other problem might be the timing of the wink. James
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of John Ackley Sent: Sunday, April 24, 2005 8:27 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] T1 E&M false busy after dial thanks info and suggestion we have a plain old PBX DID trunk from our telco will try to get more information about the trunk meanwhile I tried as documented in my zapata.conf: ; JNA tried all below - and even NO signaling same resuts ;Apr 24 21:11:15 WARNING[4430]: chan_zap.c:10198 setup_zap: Ignoring :signalling ;-- Reconfigured channel 1, Feature Group B (MF) signalling ; etc. ; ;signalling=featb :signalling=em_w ;signalling=sf_featb ;signalling=sf_featdmf ;signalling=sf jltaylor wrote: >If Feature Group B signaling is working properly (and you have Feature Group >B trunks), then >to reach your Asterisk box you would dial from the PSTN (1)+950+WXXX {W is 1 >or 0 based on the number assigned to you}. > >If you are dialing "out" {terminating where you look like the carrier} on >FGB then it depends on if you are connected to an Equal Access End Office or >a Access Tandem. > >Are you sure about the Feature Group B thing or do you have trunks that just >require MF signaling? > >If you want MF, you might try the "featdmf" setting, however, the telco >needs to know that you want FGD. >AND... >If you are connecting to an Access Tandem instead of and End Office, then >the "featdmf" in Asterisk will not work. >I have submitted a request for a quote to Digium to modify the code to make >this work properly. > >Likewise, true FGB "terminating" (where it looks like you are the carrier) >works through an Access Tandem and the additional code is missing for that >also. > >Take out the featb and add: >em_w > >This will let you see if just plain old DTMF works. > >James Taylor >903-793-1956 > > > > > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.18 - Release Date: 4/19/2005 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
