Klaus Darilion wrote:... e.g. in the follwing scenario: PBX---> asterisk ----> PSTN
1. The PBX sends SETUP messages with the appropriate TON. I want to rewrite the called number into a common format to make an ENUM lookup. Thus, I need to query the TON sent by the PBX and add the correct prefixes.
2. Further, in case of unsuccessful ENUM lookups, I want to forward the SETUP message to the PSTN, again using the appropriate TON. CVS version allows the setting of pridialplan=dynamic. But I want to use stable as this is for a stable machine. Can I implement this with stable asterisk?
I always thought that if you set pridialplan=unknown the telco would not munge the digits.
Anyway, if I set TON to unknown, I have to send the number according to the PSTN dialing plan (00 for int, 0 for national, ...). Thus, if the PBX does not use UNKNOWN, I have to translate the numbers out of their original TON to ton=unknown. Therefore, I need to process the incoming TON. How do I handle this?
regards, klaus _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
