Guys I have a problem getting a TDM400P card to go.
It has 4 FXS ports (green modules) and I get this error: [EMAIL PROTECTED] root]# ztcfg -vvvvv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Slaves: 04) Channel 05: FXO Kewlstart (Default) (Slaves: 05) Channel 06: FXO Kewlstart (Default) (Slaves: 06) 6 channels configured. ZT_CHANCONFIG failed on channel 3: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? My zaptel.conf reads: [EMAIL PROTECTED] root]# more /etc/zaptel.conf fxsks=1 fxsks=2 fxoks=3-6 loadzone=us defaultzone=us And my rc.local loads: /sbin/modprobe zaptel /sbin/modprobe wcfxo /sbin/modprobe wctdm The 2 100p cards load perfectly but the TDM is not. Any ideas? _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
