Re: [Asterisk-Users] 7777 (simulate incoming call) not working

[asterisk]

I don't know if this is related, but the last two mornings I've come in, 
the newer AAH 1.0 computer has been locked-up.  The Caps Lock and Scroll 
Lock lights on the keyboard are flashing (apparently in a specific 
pattern).  The computer is a HP 7960 w/ ASUS mobo, P4, 1.3Ghz, 256MB 
RDram.  Not being a Linux person, I don't know if this is a Linux issue 
and/or a hardware issue.  Is there a specific log I can look at that might 
tell me what happened?

Thanks,
Doug
At 03:19 PM 5/5/2005, you wrote:
I'm setting up a new AAH 1.0 box to replace my AAH 0.6 box.  Though on the 
new box, I've installed a generic ebay X100P.  I don't have my livevoip or 
voicepulse accounts set up yet on the new box (can both boxes be 
registered at the same time?).  I've set up one IP phone (SPA841) with the 
new box.  I have my SBC POTS line plugged into the fxo card.  I set up 
everything in AMP.  I can make out going calls.  The problem I'm having 
now is the digital receptionist greeting (aa_1).  If I set it to 
automatically forward to an extension it works.  But, if I have it play a 
message (press 200 for Joe, etc), you can't here the message at all.  I 
can dial the extension number and * will accept and forward me to that 
extension.  I can see on the CLI that it is suppose to be playing the 
message.  If I dial 7777 (simulate incoming call), I get the same thing, 
can't hear voice but can dial extensions.

I've adjusted the txgain and rxgain in zapata.  This only increased 
echo.  I have googled this list and SF, I can't find anything else to try 
yet, or I'm using the wrong search terms.

Probably unrelated, but when I "stop gracefully" and then restart *, I get 
the following error:
[app_zapbarge.so] => (Barge in on Zap channel application)
  == Registered application 'ZapBarge'
 [app_zapscan.so] => (Scan Zap channels application)
  == Registered application 'ZapScan'
 [EMAIL PROTECTED] root]# Ouch ... error while writing audio 
data: : Broken pipe

The only thing I can do at this point is reboot the machine.  I don't see 
any failures on the boot up.  My search for this error appears to be 
related to mpg123.  But, I never found where somebody had a solution for it.

I have tried to install fax capability (install-pdf), but that doesn't 
work either.  I get this error:

There is a pretty long delay after the "Server: CentOS-3 - Addons" line
Thanks,
Doug
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users