Those are SCCP based phones. move the cursor to option 3, but do not press select. press **#, then press select. You should see the padlock icon with an unlocked appearance. press 32 and see if you have a YES option (alternate TFTP). If so press yes, then go to option 8 and edit the ip address. The phone sometimes locks itself in the middle and I have to start over.
tim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Mensel Sent: Thursday, May 12, 2005 12:26 PM To: [email protected] Subject: [Asterisk-Users] Cisco 7960 Can't be unlocked Odd problem here--I just got a couple of Cisco 7960s from Ebay that are not functioning as expected...... These 7960s can't seem to be unlocked for manual configuration via any mechanism that I can find. If you go to settings, there is no option 9 (unlock). Available options stop at 4 (Status). **# has no effect. The Phones report that thier current firmware version is 3.1 MF.G2. When plugged into a known good DHCP/TFTP server, the phones will *sometimes* get a DHCP lease that is reflected in Settings>>>Network Configuration, but at no point will they grab new firmware via TFTP. DHCP server logs show the phones trying acquire a lease and then immediately requesting a new one. If anyone has encountered a similar situation, please advise. Thanks, John Mensel _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
