Hi, i've downloaded/compiled/installed the bristuffed asterisk Asterisk 1.0.7-BRIstuffed-0.2.0-RC8a and i'm using it with an hfc card. It runs on a debian 3.1 sarge machine with kernel 2.6.11. Asterisk works well if i configure the card using isdn4linux.
I'm having problems dialing out (not tried the input yet). This is the output from asterisk: -- Accepting AUTHENTICATED call from 192.168.0.5, requested format = 4, actual format = 4 -- Executing Dial("IAX2/[EMAIL PROTECTED]/1", "Zap/g1/3*******") in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g1/3********** -- Channel 0/1, span 1 got hangup May 25 11:11:41 WARNING[18260]: app_dial.c:412 wait_for_answer: Unable to forward voice -- Hungup 'Zap/1-1' == No one is available to answer at this time -- Executing Answer("IAX2/[EMAIL PROTECTED]/1", "") in new stack -- Executing Playtones("IAX2/[EMAIL PROTECTED]/1", "congestion") in new stack -- Executing Congestion("IAX2/[EMAIL PROTECTED]/1", "") in new stack == Spawn extension (esterni, 3*******, 4) exited non-zero on 'IAX2/[EMAIL PROTECTED]/1' -- Executing Goto("IAX2/[EMAIL PROTECTED]/1", "default|h|1") in new stack -- Goto (default,h,1) -- Executing Hangup("IAX2/[EMAIL PROTECTED]/1", "") in new stack == Spawn extension (default, h, 1) exited non-zero on 'IAX2/[EMAIL PROTECTED]/1' -- Hungup 'IAX2/[EMAIL PROTECTED]/1' this is the message i get in the syslog (a lot of these messages): zaphfc: empty HDLC frame or bad CRC received (framelen = 5, stat = 0xff, card = 0). this is the zaptel.conf: loadzone=it defaultzone=it span=1,1,3,ccs,ami bchan=1-2 dchan=3 this is the zapata.conf: group = 1 context=default signalling = bri_net_ptmp channel => 1-2 this is the modules.conf: [modules] autoload=yes noload => pbx_gtkconsole.so noload => pbx_kdeconsole.so noload => app_intercom.so load => res_features.so load => chan_modem.so load => res_musiconhold.so load => chan_alsa.so noload => chan_oss.so load => chan_zap.so [global] chan_modem.so=yes chan_zap.so=yes this is the output from the module insertion: Zapata Telephony Interface Registered on major 196 PCI: Enabling device 0000:00:06.0 (0000 -> 0003) ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 185 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd08eaf00 fifo 0xcd248000(0xd248000) IRQ 185 HZ 1000 zaphfc: Card 0 configured for TE mode zaphfc: 1 hfc-pci card(s) in this box. this is the ztcfg -vvv: Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) 3 channels configured. Thanks in advance ciao _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users