Hi, I'm pulling my hair out, cause cannot connect to EuroISDN BRI in Italy with octobri card from Beronet. I use bristuff and have following zaptel.conf...
# # This file is parsed by the Zaptel Configurator, ztcfg # # # First come the span definitions, in the format # span=<span num>,<timing>,<line build out (LBO)>,<framing>,<coding>[,yellow] # # The timing parameter determines the selection of primary, secondary, and # so on sync sources. If this span should be considered a primary sync # source, then give it a value of "1". For a secondary, use "2", and so on. # To not use this as a sync source, just use "0" # loadzone=it defaultzone=it span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami span=5,0,3,ccs,ami span=6,0,3,ccs,ami span=7,0,3,ccs,ami span=8,0,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 bchan=13,14 dchan=15 bchan=16,17 dchan=18 bchan=19,20 dchan=21 bchan=22,23 dchan=24 I get this on bri intense debug...
Unnumbered frame: SAPI: 63 C/R: 0 EA: 0 TEI: 127 EA: 1 M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] 5 bytes of data
Sending TEI Request ri=64864
[ fc ff 03 0f fd 60 01 ff ]
Unnumbered frame: SAPI: 63 C/R: 0 EA: 0 TEI: 127 EA: 1 M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] 5 bytes of data
Sending TEI Request ri=39384
[ fc ff 03 0f 99 d8 01 ff ]
Unnumbered frame: SAPI: 63 C/R: 0 EA: 0 TEI: 127 EA: 1 M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] 5 bytes of data
Sending TEI Request ri=38343
[ fc ff 03 0f 95 c7 01 ff ]
Unnumbered frame: SAPI: 63 C/R: 0 EA: 0 TEI: 127 EA: 1 M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] 5 bytes of data
Thanks very much in advance, regards, Rob. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users