You're connected to a p2mp bri, switch to bri_cpe_p2mp Matteo.
Il giorno mer, 08-06-2005 alle 19:54 +0200, Robert Rozman ha scritto: > Hi, > > I'm pulling my hair out, cause cannot connect to EuroISDN BRI in Italy with > octobri card from Beronet. I use bristuff and have following zaptel.conf... > > # > # This file is parsed by the Zaptel Configurator, ztcfg > # > # > # First come the span definitions, in the format > # span=<span num>,<timing>,<line build out > (LBO)>,<framing>,<coding>[,yellow] > # > # The timing parameter determines the selection of primary, secondary, and > # so on sync sources. If this span should be considered a primary sync > # source, then give it a value of "1". For a secondary, use "2", and so on. > # To not use this as a sync source, just use "0" > # > loadzone=it > defaultzone=it > > span=1,1,3,ccs,ami > span=2,0,3,ccs,ami > span=3,0,3,ccs,ami > span=4,0,3,ccs,ami > span=5,0,3,ccs,ami > span=6,0,3,ccs,ami > span=7,0,3,ccs,ami > span=8,0,3,ccs,ami > > bchan=1,2 > dchan=3 > bchan=4,5 > dchan=6 > bchan=7,8 > dchan=9 > bchan=10,11 > dchan=12 > > bchan=13,14 > dchan=15 > bchan=16,17 > dchan=18 > bchan=19,20 > dchan=21 > bchan=22,23 > dchan=24 > > I get this on bri intense debug... > > > > Unnumbered frame: > > SAPI: 63 C/R: 0 EA: 0 > > TEI: 127 EA: 1 > > M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] > > 5 bytes of data > Sending TEI Request ri=64864 > > > [ fc ff 03 0f fd 60 01 ff ] > > > Unnumbered frame: > > SAPI: 63 C/R: 0 EA: 0 > > TEI: 127 EA: 1 > > M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] > > 5 bytes of data > Sending TEI Request ri=39384 > > > [ fc ff 03 0f 99 d8 01 ff ] > > > Unnumbered frame: > > SAPI: 63 C/R: 0 EA: 0 > > TEI: 127 EA: 1 > > M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] > > 5 bytes of data > Sending TEI Request ri=38343 > > > [ fc ff 03 0f 95 c7 01 ff ] > > > Unnumbered frame: > > SAPI: 63 C/R: 0 EA: 0 > > TEI: 127 EA: 1 > > M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] > > 5 bytes of data > > > > Thanks very much in advance, > > regards, > > Rob. > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users