We have a te410p, with the following connections: span 1 connected to a 32 Channel EuroISDN span 2 connected to a card in a legacy pbx (Meridian) span 3 connected to a 10 Channel EuroISDN span 4 connected to a card in a legacy pbx (Meridian)
We have no need for the meridian now, and decided to turn it off. I did not change the zaptel.conf settings, nor the zapata.conf settings.
When the meridian was turned off, * would no longer allow any outbound or inbound calls through spans 1 and 3 (although these are connected to the pstn). When I turned the meridian back on - in a hurry I might add ;) (had no time to play with configurations) and restarted *, then everything was ok again ...
Should I comment out span 2 and 4, run a ztcfg, unplug the cables in 2 and 4, and then turn off the meridian ?
Julian. /* zaptel.conf */ span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 span=2,0,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 span=3,2,0,ccs,hdb3,crc4 bchan=63-77,79-93 dchan=78 span=4,0,0,ccs,hdb3,crc4 bchan=94-108,110-124 dchan=109 loadzone=uk defaultzone=uk _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users