What card and server are you using to run Trixbox?
We had a similar issue using Switchvox on an HP DL360 and a Digium PCIe card. We were able to match the random static with error messages in the /var/log, it turned out. What we were able to determine is that there was an issue with the digium driver and asterisk regarding timing that was causing this. We changed cards (which changed drivers) and the random static stopped. chris From: [email protected] [mailto:[email protected]] On Behalf Of Bergen, Mark Sent: September-13-10 8:27 PM To: [email protected] Subject: [*] Garbled Outbound Audio We have noticed on occasion the outbound audio on our phone system is garbled. We have checked the network and it seems to be in good order. It happens randomly and usually only for a few seconds (just long enough to annoy users). It has also happened when there was only a light load on the network. We configured one of the snom 320 handsets to only use the G711u codec and no real change (outbound audio was still garbled a couple of times briefly over a 1.5hr phone call). Our system uses VoIP only inside our local network, we have an MTS PRI for outbound calls. Anyone have any ideas or pointers? Thanks; Mark Mark Bergen Network Support Analyst ONLINE BUSINESS SYSTEMS Explore | Innovate | Lead 200-115 Bannatyne Ave., Winnipeg MB R3B 0R3 [email protected] | Direct Line: 204.982-0218 Office: 204.982.0200 | Fax: 204.982.0201 <http://www.obsglobal.com/> www.obsglobal.com
_______________________________________________ Asterisk mailing list [email protected] http://www.muug.mb.ca/mailman/listinfo/asterisk
