On Sun, 2006-03-26 at 18:26 -0500, Dave Donovan wrote: > Most homes I've seen don't have a home run cable for each phone jack. > One solution for this is to deliver the unfiltered signal on pair 2 > (the outside pair, black/yellow I think) and then put the filtered > signal on pair 1. Then all you have to do is rig something up at the > modem jack so that lines 1 and 2 are swapped. > > Having said all that, a bix tool costs aroun $60-$90 so if you don't > have one you could save yourself some coin and grief by just springing > for the extra filters.
Most homes also do not have a bix, so I doubt you would need a bix
tool.Just grab a couple of surface-mount phone jacks, wire it up like
Dave suggests and put the filter between them.
--
John Van Ostrand
Net Direct Inc.
Director of Technology
564 Weber St. N. Unit 12
Waterloo, ON N2L 5C6
map
[EMAIL PROTECTED]
Ph: 519-883-1172
ext.5102
Linux Solutions / IBM
Hardware
Fx: 519-883-8533
signature.asc
Description: This is a digitally signed message part
