I can call Norstar extensions from the IP phone, but not the other way
around.
Oh ... I'm not sure what your setup is like, but I don't have this problem.
I can call voip phones from nortel stations just fine. If you bridge from
nortel extension => nortel ATA => asterisk, the asterisk should handle the
incoming calls like any other pots line. As far as the Norstar is concerned,
it has just dialed an extension.
Dominic
----- Original Message -----
From: "Mark Palser" <[EMAIL PROTECTED]>
To: "Dominic Ogbonna" <[EMAIL PROTECTED]>; <[email protected]>
Sent: Wednesday, April 19, 2006 2:39 PM
Subject: Re: [on-asterisk] From Nortel to Asterisk
I've done the same thing and encountered the same problem, as far as I
know Norstar does not send DTMF internally, in my situation I can call
Norstar extensions from the IP phone, but not the other way around. If I
dial our (external PSTN) number from a Norstar extension, then dial the
ATA extension, I can call the IP phone. A telecom guy told me an ATA
expansion card for the Norstar would fix the problem, Jim?
----- Original Message -----
From: "Dominic Ogbonna" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, April 19, 2006 2:16 PM
Subject: [on-asterisk] From Nortel to Asterisk
Does anyone have experience integrating an asterisk system into an
exisitng Norstar system? Basically, I bridged a norstar extension into an
asterisk box, thusly:
Norstar extension => nortel ATA =>TDMcard/Asterisk => Voip phone.
Everything works great ... except for one thing: I can't get the voip
phone to log into the norstar queue, like you would with a regular nortel
phone. How do I send feature commands to the Norstar from a voip phone?
Any ideas?
Dominic
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
