hmm, I hope this isn't a problem related to the Sangoma card - we've been really pleased with its performance so far (no shared IRQ conflicts like the ones that can cause problems on some of the Digium cards - we just stuck it in, compiled the asterisk/zaptel and the Wanpipe drivers, and it started working perfectly.)
Mike On 4/24/06, Stephan Monette <[EMAIL PROTECTED]> wrote: > Hey guys, > > I got the exact same problem with a customer using a Sangoma A200 card. > > I tried everything and did not find a solution. Bell is providing disconnect > supervision and I'm wondering if it's not a problem with the Sangoma card? > > We're using the latest firmware and driver from Sangoma. Anyone using the > new Digium 2400 card have the same problem? > > Thanks, > > Stephan Monette > Unlimitel inc. > Tel.: 1 (877) 464-6638, x221 > Fax.: (613) 443-7773 > > -----Original Message----- > From: Mike Garey [mailto:[EMAIL PROTECTED] > Sent: Monday, April 24, 2006 2:21 PM > To: [email protected] > Subject: [on-asterisk] Does Bell provide Remote Disconnect Supervision? > > We're having some problems on our asterisk box where a user calls in > through a PSTN line, gets to voicemail, but hangs up before leaving a > message, yet asterisk doesn't realize the phone has been disconnected > and starts recording an empty message, which of course can become very > annoying. I also notice that when calling from a PSTN line and > ringing an extension, then immediately hanging up, the SIP phone on > the other end will continue ringing about 4 or 5 times before Asterisk > realizes the call has hung up. > > After doing some searching to find out how to fix this problem, I came > across the following page on the asterisk wiki which talks about > "Remote Disconnect Supervision": > <http://www.voip-info.org/tiki-index.php?page=Asterisk+Disconnect+Supervisio > n> > > Before I call Bell and waste the next hour or two trying to find > someone who may know something about this feature, I thought I'd send > e a message to the list and see if anyone here happens to know whether > Bell provides Remote Disconnect Supervision by default on business > lines, and if not, who/where I have to call to get this enabled. > > I'm running Asterisk 1.2.6, Zaptel 1.2.5 with a Sangoma A200 4 port > FXO card. I've also got "signalling = fxs_ks" in zapata.conf for all > my channels, and "fxsks=1-4" in zaptel.conf > > Thanks in advance for any help/suggestions. > > Mike > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
