How about this ....
A Sipura 3000 using the FXO port and the network port (SIP) to a
Lynksys WRT54GS firmware and get Asterisk to convert from SIP to IAX
Total cost will be under $200
Henry
PS. I have a Sipura 3000 terminating a Toronto PSTN number into a SIP
extension on an Asterisk system in Whitby
This little bugger gives the client access to and from the GTA area (
just like a FX line but for free). Thus saving about $250 per month.
Now my client buys me lunch.
The plan in the future is to use a Lynksys/Asterisk to enable some more
local features.
Mike Ashton wrote:
Ok,
2 weeks ago I posted asking if anyone could recommend a IAX single
line FXO device, I'm still no closer to a solution. I've scoured and
can't find any available device for a single FXO port. I'd use a
Sipura3000 if NAT wasn't an issue on the clients end.
So if anyone has any leads to a single FXO IAX device let me know.
Other options are:
1 - Build a server, and ideally if I go this route I'd like it to look
like an appliance but want to limit the cost. Looks like my appliance
option is to build one using a Soekris net4801 (US$240) and a Sangoma
a200 (CA$290) (since it supports 3.3v, not sure about the Digium). But
now were getting up there in cost to about 600 bucks. That or a XPC
form computer as a small Asterisk server with a single FXO card.
2 - Try a IAX FXS device ( IAXy) and a FXS/FXO converter (any one
tried one of these?).
All I want to do is to be able to hang off a clients PBX as a single
extension so we can easily access their PBX without using DID ( not an
option for this small client).
Feedback.... Thoughts.... PLEASE and thanks
Mike
--
Mike Ashton
Quality Track Intl
Ph: 647-722-2092 x 251
Cell: 416-527-4995
Fax: 416-352-6043
QTI CONFIDENTIAL AND PROPRIETARY INFORMATION
The contents of this material are confidential and proprietary to Quality Track
International, Inc.
and may not be reproduced, disclosed, distributed or used without the express
permission of an authorized representative of QTI.
Use for any purpose or in any manner other than that expressly authorized is
prohibited.
If you have received this communication in error, please immediately delete it
and all copies, and promptly notify the sender.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
Henry L.Coleman [ VoIP-PBX ] Tel.1 866 415-5355 Ext.301
