Syed, Here are a couple of thoughts.
1) If the call to your cell phone is going out a VOIP connection, consider that you might have a firewall/NAT issue preventing the RTP part of the conversation from working correctly. Some searching on voip-info.org will give you lots of info on troubleshooting this. 2) as for the missing ringback, this is probably indicative of the problem 1. You don't have a working audio stream to your VOIP provider and so they're playing the ringback but your caller isn't hearing it. You can cheat this by placing an 'r' option in the dial command but I don't think it's the root of your problem. Take a look at those things and let us know if that solves it. Dave On 8/28/06, Syed Zia <[EMAIL PROTECTED]> wrote:
Folks. I need your help in getting rid of two issues... I have this dial plan and all I want is that it should ring on my cell phone for 20 seconds and if I don't pickup it would then ring my home phone. It does the ringing and goes to the next phone in 20 seconds and every thing works fine except 2 issues. If I pickup the first phone, there is NO voice at all. If I let it go to the second phone, it works fine and I can talk crystal clear. The second issue is that I don't get a ring back which is the tone which a caller should get to let a caller know that the bell is ringing on the other end. I would really appreciate if you someone can help me here and thank you in advance for running such a wonderful forum. I learn a lot from you guys Thanks Syed --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
-- David Donovan Consultant Fulcrum Solutions
