I didn't see any. Only dis-advantages. If you use the WAN port you will
loose network access to the device - by definition - unless you enable the
remote access to it on a predefined ip and port. Other than that using it on
the LAN port works great.
I also have 2 of these, one on my bell line, and the other just a telephone
VOIP adapter for now, both on the LAN port.
Zoltan.
----- Original Message -----
From: "Michael Roberts" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, November 06, 2006 2:50 PM
Subject: [on-asterisk] SPA-3102 LAN or WAN?
Greetings Asterisk folks,
I am new to asterisk and VOIP, but this mailing list and internet sites
are very helpful.
I have a Linksys SPA-3102 I want to use as a VOIP/PSTN gateway. In
addition to the VOIP capabilities being similar (if not identical) to
the Sipura SPA-3000, it also has router software as well. I don't care
much for the router as I have a dedicated firewall/router on my LAN
already. But this 3102 has a LAN and a WAN network ports. I've had
success connecting to my LAN using either port, however is there any
advantage using one over the other?
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
