You are in luck J Here is a sample from our Asterisk 1.4, sip.conf
[mci1] host=209.47.1.157 type=peer insecure=port,invite dtmfmode=inband disallow=all allow=ulaw allow=alaw allow=gsm allow=g723 allow=g729 context=from_mci [mci2] host=209.47.1.158 type=peer insecure=port,invite dtmfmode=inband disallow=all allow=ulaw allow=alaw allow=gsm allow=g723 allow=g729 context=from_mci If you need further help, let me know. From: John Oladehinde [mailto:[EMAIL PROTECTED] Sent: Saturday, February 10, 2007 10:51 AM To: [email protected] Subject: [on-asterisk] Connect to Gateway with just IP address Authentication I am trying to test out MCI's sip service. I was provisioned with just two IP addresses of the gateway that I am connecting to. And some did's. I was told that the IP address that I gave them was what I was going to be authenticated with, along with some ID I think. Has anybody heard of this, and if so, how do I setup a register for that? Best regards,
