do a "sip show peers" and it will show you the lag time of your off site
phone.
Cheers!
Reza.
----- Original Message -----
From: "Mark Borg" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, May 20, 2007 10:13 PM
Subject: Re: [on-asterisk] cannot register SIP offsite thru vpn....
On Sun May 20 2007 21:45:43 Reza - Asterisk Enthusiast wrote:
Mark:
There is likely a problem in your configuration file. The solution is
quite simple, but the information you have provided is not enough to
solve
your issue. The debug messages you provided merely shows the
registration has failed. We need to look at 2 things:
1. Your SIP.CONF file ... not the entire file, but the segment that has
your 6010 settings. I suspect you have it under your [6010] context.
2. Your Aastra configuration and model number and the exact location
where
you entered your credentials. That is "Global SIP" and/or settings under
"Line 1" of your phone. We need to see the exact entries except the
password.
Its clear from the message that your Aastra is connecting to your
Asterisk
server and for some reasons it is not accepting your registration.
Additionally please check the firmware version of your phone.
Last Friday we were at a clients who purchased close to a dozen phones
(brand new) but had firmware dated May 2005. We upgraded it to firmware
date 2007 version. 1.4.something... and it resolved their issues
without
us having to touch any configurations on their phones!
Waiting for your settings to be able to properly analyze.
Cheers!
Reza.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Hi Reza, thanks for the response!
After 3 or 4 hours looking at the same lines (sleepy?) I set the domain
to '192.168.0.,"mycontext"... 192.168.2.,"mycontext"'; now domains are OK.
I
suppose I "knew" about not having last octet for a domain, just didn't
see
it.
Anyways, everyone is now registered and reachable, but....
Placing a call to the off-site extension (6006) shows 'busy'.
it is via vpn... maybe too much lag or ?
this is the debug of the call, if you wanna see it...
-- Executing [EMAIL PROTECTED]:1] Dial("Zap/1-1", "SIP/6006|1") in new
stack
-- Called 6006
-- SIP/6006-0820cfd8 is ringing
-- Got SIP response 486 "Busy Here" back from 192.168.0.226
-- SIP/6006-0820cfd8 is busy
== Everyone is busy/congested at this time (1:1/0/0)
thanks for the time!!!
markborg
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
