Thanks for the input Dave and Peter.I expected this card to actually have the RED and GREEN indication if the line is connected or not but apparently it doesn't. Well, I still have to do some more testing to make sure that it doesn't come with that feature before trying the alternative dial out commands that you Dave suggested.Yes, I am using 2.2 for production and it works just fine. It's stable as it is the final version. I haven't played around with different channel groups as I am using only one module (2 FXO) for this system so I won't be able to comment on that. And you are right I don't have any g1 or g2, etc....It's plain g0 and two channels.Thanks guys,Bruce> Date: Wed, 13 Jun 2007 20:44:00 -0300> From: [EMAIL PROTECTED]> To: [email protected]> Subject: Re: [on-asterisk] Zap rollover failiur> > There was a thread on that not too long ago. I can't remember if there > was a solution of the line goes to RED state. Are you really using 2.2 > for production work? Do you find it stable? I have a problem with > channel groups on ver. 2.0. They aren't functioning there anymore. You > don't by any chance have a g1 or g2 defined?> > Peter M.> > > Bruce Nik wrote:> > Hello Everyone,> >> > I have a quick question :)> >> > When trying to dial out line 1 (Zap 1 of g0) dials out even though > > it's not connected to PSTN.> > How can I setup line 2 (Zap 2 of g0) to dial out in case line 1 (Zap 1 > > of g0) fails or is not connected to PSTN.> > I, basically need a fail over line.> >> > System is TB 2.2 using A400 from Sangoma.> >> >> > Thanks,> > Bruce> >> > ------------------------------------------------------------------------> > Get news, entertainment and everything you care about at Live.com. > > Check it out! <http://www.live.com/getstarted.aspx%20>> > > ---------------------------------------------------------------------> To unsubscribe, e-mail: [EMAIL PROTECTED]> For additional commands, e-mail: [EMAIL PROTECTED]> _________________________________________________________________ News, entertainment and everything you care about at Live.com. Get it now! http://www.live.com/getstarted.aspx
