Thanks for all your comments it has been very useful, it seem that the A101D at around $1000 is the best bet. The single span T1 Rino card is about $500 but when you add the hardware echo module it's about the same cost. I am going to drive you guys mad by asking another question.... I will need to pre-test this T1 card before installation is there any way to do this without the actual T1 trunk (like a crossover cable)?
Thanks again for everyones input Henry < David Cook> > Agreed. Been down that road. Sangoma's people are the difference. If their > hardware doesn't work as-advertised, they will make your problem 'Job 1' > until it is resolved. > > And they have a significantly better than industry standard warranty - > another indicator that the people stand behind their product. > > - dbc. > > > -----Original Message----- > From: Marc Carrafiello [mailto:[EMAIL PROTECTED] > Sent: August-08-07 4:33 PM > To: [email protected] > Subject: RE: [on-asterisk] T1 with Echo/No Echo > > > Henry, > > I agree with the opinions of the replies so far, and I'll also throw in > that > I'm 60+ days past my Asterisk+Bell PRI+Sangoma A101D launch with no > complaints of echo or poor quality. We switched from both a Meridian SL1 > with PRIs and a Norstar MICS with business lines with no complaints. > > Aside from some setup woes with the Sangoma card, it's been a pleasure to > deal with. If you are going to go Sangoma and the new A101D card, you > must > use the beta drivers, you must use the correctly patched version of those > beta drivers, and be careful if you are running a 64bit 4GB system. I got > nailed by all of those gotchas. The good news is that the Sangoma support > site & people are great. > > -Marc > > > >> -----Original Message----- >> From: Apache [mailto:[EMAIL PROTECTED] On >> Behalf Of Henry L.Coleman >> Sent: Wednesday, August 08, 2007 3:08 PM >> To: [email protected] >> Subject: [on-asterisk] T1 with Echo/No Echo >> >> Hi all, I have a client who is getting a T1 from Bell. As I >> don't have any >> experience in the quality of various vendors PCI cards and if echo >> cancellation is really required I am looking for some real >> life experience >> on these products. I have heard good things about Sangoma so I will >> probably go with them, but the echo card is twice the price of the >> standard T1 card and as the client is not flush with money I >> would prefer >> to use the least expensive option. I understand that the echo >> cancellation >> is under software control but how much overhead does this >> really add to >> the system ? If anyone out there is using the A101 card I >> would grateful >> if they could let me know if there are any quality issues >> with this card. >> >> >> -- >> Henry L. Coleman. >> >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] >> For additional commands, e-mail: [EMAIL PROTECTED] >> >> > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > -- Henry L. Coleman. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
