Pin 1->4, 2->5 You need to follow some instructions on Sangoma's web site to reconfigure the settings to validate loopback and exercise the card but you won't be able to make any calls. (Of course, if you had an A102d card you could call yourself :-)
- dbc. -----Original Message----- From: Apache [mailto:[EMAIL PROTECTED] On Behalf Of Henry L.Coleman Sent: August-08-07 7:34 PM To: [email protected] Subject: RE: [on-asterisk] T1 with Echo/No Echo Thanks for all your comments it has been very useful, it seem that the A101D at around $1000 is the best bet. The single span T1 Rino card is about $500 but when you add the hardware echo module it's about the same cost. I am going to drive you guys mad by asking another question.... I will need to pre-test this T1 card before installation is there any way to do this without the actual T1 trunk (like a crossover cable)? Thanks again for everyones input Henry < David Cook> > Agreed. Been down that road. Sangoma's people are the difference. If their > hardware doesn't work as-advertised, they will make your problem 'Job 1' > until it is resolved. > > And they have a significantly better than industry standard warranty - > another indicator that the people stand behind their product. > > - dbc. > > > -----Original Message----- > From: Marc Carrafiello [mailto:[EMAIL PROTECTED] > Sent: August-08-07 4:33 PM > To: [email protected] > Subject: RE: [on-asterisk] T1 with Echo/No Echo > > > Henry, > > I agree with the opinions of the replies so far, and I'll also throw in > that > I'm 60+ days past my Asterisk+Bell PRI+Sangoma A101D launch with no > complaints of echo or poor quality. We switched from both a Meridian SL1 > with PRIs and a Norstar MICS with business lines with no complaints. > > Aside from some setup woes with the Sangoma card, it's been a pleasure to > deal with. If you are going to go Sangoma and the new A101D card, you > must > use the beta drivers, you must use the correctly patched version of those > beta drivers, and be careful if you are running a 64bit 4GB system. I got > nailed by all of those gotchas. The good news is that the Sangoma support > site & people are great. > > -Marc > > > >> -----Original Message----- >> From: Apache [mailto:[EMAIL PROTECTED] On >> Behalf Of Henry L.Coleman >> Sent: Wednesday, August 08, 2007 3:08 PM >> To: [email protected] >> Subject: [on-asterisk] T1 with Echo/No Echo >> >> Hi all, I have a client who is getting a T1 from Bell. As I >> don't have any >> experience in the quality of various vendors PCI cards and if echo >> cancellation is really required I am looking for some real >> life experience >> on these products. I have heard good things about Sangoma so I will >> probably go with them, but the echo card is twice the price of the >> standard T1 card and as the client is not flush with money I >> would prefer >> to use the least expensive option. I understand that the echo >> cancellation >> is under software control but how much overhead does this >> really add to >> the system ? If anyone out there is using the A101 card I >> would grateful >> if they could let me know if there are any quality issues >> with this card. >> >> >> -- >> Henry L. Coleman. >> >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] >> For additional commands, e-mail: [EMAIL PROTECTED] >> >> > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > -- Henry L. Coleman. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
