Lloyd,
When I did it I used a fresh install of [EMAIL PROTECTED], I believe it was
2.5. If I recall right, I did the initial install, removed AMP, then did
the PhoneCall install and it worked. All told I think I spent 2 hours
doing the install. But it was on a test box, so I only played with it
for about a week, I then needed the box for something else so I never
got a chance to put it through it's full paces nor did I put into
production. Main reason was back then they PhoneCall developers were
working on a new version to work with 1.4 so I thought I'd wait for it
before I really invested any time in implementing. Little did I know it
would take them almost 2 years.
I'd actually given up on the project but just noticed about a month ago
(hadn't checked in 6 months) that they had put up a new release for
download. For almost a year there were no downloads available at all. So
this inconsistency makes me leery, but if it works handling the
Asterisk configuration for multi tenant, then after that how much
support are you going to need?
Mike
Aloysius T Lloyd ( SunTel Technologies) wrote:
Hello Mike,
PhoneCall features are very attractive. How many years they are in the
market?
I try to call the number on their website .... no luck either the
number is not available or busy...
How hard to install the PhoceCall ?
Thank you
Lloyd
On Feb 13, 2008 10:00 AM, Mike Ashton <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
Another Multi Tenant system is PhoneCall (
http://www.vecsector.com/phonecall/ )
It went quiet for a while, but has resurfaced as both a commercial
and a GPL releases. Only thing that would make me leary here is
that their development cycle seems to be very slow. Now I think
that the commercial code is well supported but the GPL version may
be questionable. But costs nothing to give it a test drive except
your time.
I've not tried the latest version but the one I tried 2 years ago
was pretty good. It will support exactly what your looking for.
Has an easy tenant set up, define them, which routing, which did's
, then how many extensions and what range and it builds it all out
for you. And each tenant can manage their piece if desired.
I actually also have a need for this so may try the latest code.
If I do will report back ( just need to find the time )
Mike
Henry L.Coleman wrote:
Martin is correct, some people have use contexts to simulate a multi-tenant
system but if you want the
"real thing" I suggest you take a look at Thirdlane software (its not free,
but would pay for itself in
any hosted
system)
Henry L. Coleman
VOIP-PBX.CA <http://VOIP-PBX.CA> Tel: 647-723-5160 / 1-866-415-5355
http://voip-pbx.ca
< Martin Glazer>
From my understanding, Trixbox really is not suitable for a
multi-tenaant hosted PBX unless you are using a separate instance of
Trixbox for each client.
Martin
M.Arshad khan wrote:
What about creating same extensions for different companies.> Date: Mon, 11
Feb 2008 09:24:57 -0500>
From: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> To: [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> Subject: Re: [on-asterisk] TrixboxCE hosted PBX>
CC: [email protected] <mailto:[email protected]>> > Just create diff inbound route for
that..> > > Alex> > On Mon, 11 Feb 2008
14:05:28 +0000> M.Arshad khan <[EMAIL PROTECTED]> <mailto:[EMAIL PROTECTED]> wrote:> > > >
> Hello everyone,> > > > How to
configure trixboxCE as a hosted pbx solution based on company's incoming DID.> >
> > ->DID
4161234567->Company1 IVR Menu->ext 101, 102, 103 and so on.> > ->DID
6471234567->Company2 IVR Menu->ext
101, 102, 103 and so on.> > > > > > Thanks,> > Arshad> > > > > > > > >
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
For additional commands, e-mail: [EMAIL PROTECTED] <mailto:[EMAIL
PROTECTED]>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
For additional commands, e-mail: [EMAIL PROTECTED] <mailto:[EMAIL
PROTECTED]>
--
Mike Ashton
Quality Track Intl
Ph: 647-722-2092 x 301
Cell: 416-527-4995
Fax: 416-352-6043
QTI CONFIDENTIAL AND PROPRIETARY INFORMATION
The contents of this material are confidential and proprietary to Quality
Track International, Inc.
and may not be reproduced, disclosed, distributed or used without the
express permission of an authorized representative of QTI.
Use for any purpose or in any manner other than that expressly authorized
is prohibited.
If you have received this communication in error, please immediately delete
it and all copies, and promptly notify the sender.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
For additional commands, e-mail: [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
--
Lloyd
Tel:416-500-8014
--
Mike Ashton
Quality Track Intl
Ph: 647-722-2092 x 301
Cell: 416-527-4995
Fax: 416-352-6043
QTI CONFIDENTIAL AND PROPRIETARY INFORMATION
The contents of this material are confidential and proprietary to Quality Track
International, Inc.
and may not be reproduced, disclosed, distributed or used without the express
permission of an authorized representative of QTI.
Use for any purpose or in any manner other than that expressly authorized is
prohibited.
If you have received this communication in error, please immediately delete it
and all copies, and promptly notify the sender.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
