Mike, Leif and all others who responded online and offline, thank you all! I am still testing but so far it appears 1.4.x is working just fine with my carrier 100% of the time.
>From input of friends both online and offline, I've concluded that RFC2833 is not 100% compliant with Asterisk 1.2.x Thanks again to everyone! > Reza, > > I've had many issues with this over the years. Almost all of our dialing > uses IVR at the termination point. > > The issue like Phil said it is the the last mile termination carrier > where the problem arises, our carriers will try rerouting if they can > but the issues still persists, if they all terminate with the same > carrier. I'd say it probably isn't because they are gov numbers but > where they are located ( New Brunswick ? ). I have a bunch of areacodes > in North America that I have had to set up as DTMF inband to alleviate > the issue. > > Here are the ones that I currently experience problems with: > > 506 - Saint Johns NB > 801 - Salt Lake City UT > 210 - San Antonio TX > 407 - Orlando FL ( one of the crappiest termination points in North > America, not just DTMF issues ) > > I have also had issues in the past with: > 403 - Calgary AB > 306 - Saskatoon SK > > 402 - Omaha NE > 305 - Miami FL > > Mike > > Reza M. Reza wrote: >> One more thing... I'd like to add that when I change dtmfmode to inband >> in the outbound trunk settings, then the success is 100% when reaching >> the >> government numbers and few other numbers on my 1.2 Asterisk. >> >> The problem may be in the RFC2833 compatibility between Asterisk 1.2 and >> other switches? Does anyone recall of any listed bugs in the RFC2833 >> compliance in Asterisk 1.2? >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] >> For additional commands, e-mail: [EMAIL PROTECTED] >> >> >> > > -- > Mike Ashton > > Quality Track Intl > > Ph: 647-722-2092 x 301 > Cell: 416-527-4995 > Fax: 416-352-6043 > > QTI CONFIDENTIAL AND PROPRIETARY INFORMATION > > The contents of this material are confidential and proprietary to Quality > Track International, Inc. > and may not be reproduced, disclosed, distributed or used without the > express permission of an authorized representative of QTI. > Use for any purpose or in any manner other than that expressly authorized > is prohibited. > If you have received this communication in error, please immediately > delete it and all copies, and promptly notify the sender. > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
