Thanks both of you, I will check out the Yahoo group.

On Thu, May 15, 2008 at 8:23 PM, Drew Gibson <[EMAIL PROTECTED]> wrote:

> Hi Shidan,
>
> Asterisk was running on my Slug at home for a few months until the HDD (a
> dodgy, leftover laptop drive!) died. The SLUG is now resurrected on a 4GB
> USB stick, waiting for me to find time to configure it.
>
> I used a Linksys SPA3102 for the POTS connection and our old answering
> machine. Obsolete, I know, but it all has to pass the infamous "wife test".
> After a bit of fiddling to get the SPA going properly it was very reliable.
> Also had Zoiper on my laptop so I could make calls home from work.
>
> The setup was used to model quite a few dialplan features for the office
> system. I'd say it was ideal for that. Maybe you can get the Boss to pay for
> it! :-)
>
> One issue I had not solved before the HDD crash was echo on the POTS line.
> I think it came down to latency with the ATA added to further delay from a
> 5.8GHz digital cordless phone. Just too much delay for the echo canceler to
> deal with. Next time, I might try a DECT phone unless I can find a
> reasonably priced SIP cordless.
>
> My favourite feature was sending telemarketers to a ridiculous IVR. "All of
> our family members are currently busy serving other telemarketers. Please
> hold, and your call will be ignored in sequence..."
>
> regards,
>
> Drew
>
>
>
> Ovidiu Sas wrote:
>
>> Hello Shidan,
>>
>> Check out the nslu2-asterisk group at [EMAIL PROTECTED]
>> You can run find the following asterisk flavors:
>> asterisk => asterisk 1.2
>> asterisk14 => asterisk 1.4
>> asterisk16 => asterisk 1.6 beta
>>
>> Regards,
>> Ovidiu Sas
>>
>> Shidan wrote:
>>
>>> Has anyone run Asterisk on the Slug, I would like to hear your
>>> experiences
>>> if you have. Also if anyone has a SLUG for purchase they want to part
>>> with
>>> let me know.
>>>
>>> ---
>>> Shidan
>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [EMAIL PROTECTED]
>> For additional commands, e-mail: [EMAIL PROTECTED]
>>
>>
>>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>

Reply via email to