why are you using a fax/voice switch instead of a something like the faxdetect function in asterisk?
-----Original Message----- From: Andre Courchesne - Consultant [mailto:[EMAIL PROTECTED] Sent: Wed 10/22/2008 1:43 PM To: Asterisk User Group Subject: [on-asterisk] Problem with fax/voice switch Hi, I have the following setup analog line ----- fax/voice switch ----voice-----> Sangoma FXO port 1 | | +-------------fax-------> Sangoma FXO port 2 Problem is if you do a voice call the fax/voice switch does it's trick and sends the call to FXO port 1. This call is answered by Asterisk and goes into an IVR. But as soon as you press digits to access an extension, here is what happens: [Oct 21 16:44:33] DEBUG[4601] chan_zap.c: Ignore switch to REVERSED Polarity on channel 26, state 4 [Oct 21 16:44:33] DEBUG[4601] chan_zap.c: Ignoring Polarity switch to IDLE on channel 26, state 4 [Oct 21 16:44:33] DEBUG[4601] chan_zap.c: Polarity Reversal event occured - DEBUG 2: channel 26, state 4, pol= 0, aonp= 0, honp= 0, pdelay= 600, tv= 556194379 [Oct 21 16:44:35] DEBUG[4601] chan_zap.c: Ignore switch to REVERSED Polarity on channel 26, state 4 [Oct 21 16:44:35] DEBUG[4601] chan_zap.c: Ignoring Polarity switch to IDLE on channel 26, state 4 [Oct 21 16:44:35] DEBUG[4601] chan_zap.c: Polarity Reversal event occured - DEBUG 2: channel 26, state 4, pol= 0, aonp= 0, honp= 0, pdelay= 600, tv= 556196371 [Oct 21 16:44:39] DEBUG[4601] chan_zap.c: Ignore switch to REVERSED Polarity on channel 26, state 4 [Oct 21 16:44:39] DEBUG[4601] chan_zap.c: Ignoring Polarity switch to IDLE on channel 26, state 4 [Oct 21 16:44:39] DEBUG[4601] chan_zap.c: Polarity Reversal event occured - DEBUG 2: channel 26, state 4, pol= 0, aonp= 0, honp= 0, pdelay= 600, tv= 556200259 Any ideas? Andre --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
