Because it was there and was working with the Meridian system that was in place.
We tried to minimize the changes.
Also so fax I have not been over impressed by the voice/fax switch using
asterisk.
Philip Mullis wrote:
why are you using a fax/voice switch instead of a something like the faxdetect
function in asterisk?
-----Original Message-----
From: Andre Courchesne - Consultant [mailto:[EMAIL PROTECTED]
Sent: Wed 10/22/2008 1:43 PM
To: Asterisk User Group
Subject: [on-asterisk] Problem with fax/voice switch
Hi,
I have the following setup
analog line ----- fax/voice switch ----voice-----> Sangoma FXO port 1
|
|
+-------------fax-------> Sangoma FXO port 2
Problem is if you do a voice call the fax/voice switch does it's trick and
sends the call to FXO port 1. This call is answered by Asterisk and goes into an
IVR. But as soon as you press digits to access an extension, here is what happens:
[Oct 21 16:44:33] DEBUG[4601] chan_zap.c: Ignore switch to REVERSED Polarity on
channel 26, state 4
[Oct 21 16:44:33] DEBUG[4601] chan_zap.c: Ignoring Polarity switch to IDLE on
channel 26, state 4
[Oct 21 16:44:33] DEBUG[4601] chan_zap.c: Polarity Reversal event occured -
DEBUG 2: channel 26, state 4, pol= 0, aonp= 0, honp= 0, pdelay= 600, tv= 556194379
[Oct 21 16:44:35] DEBUG[4601] chan_zap.c: Ignore switch to REVERSED Polarity on
channel 26, state 4
[Oct 21 16:44:35] DEBUG[4601] chan_zap.c: Ignoring Polarity switch to IDLE on
channel 26, state 4
[Oct 21 16:44:35] DEBUG[4601] chan_zap.c: Polarity Reversal event occured -
DEBUG 2: channel 26, state 4, pol= 0, aonp= 0, honp= 0, pdelay= 600, tv= 556196371
[Oct 21 16:44:39] DEBUG[4601] chan_zap.c: Ignore switch to REVERSED Polarity on
channel 26, state 4
[Oct 21 16:44:39] DEBUG[4601] chan_zap.c: Ignoring Polarity switch to IDLE on
channel 26, state 4
[Oct 21 16:44:39] DEBUG[4601] chan_zap.c: Polarity Reversal event occured -
DEBUG 2: channel 26, state 4, pol= 0, aonp= 0, honp= 0, pdelay= 600, tv= 556200259
Any ideas?
Andre
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
