Sounds like it's sending CLID via FSK.
Either turn off CLID as part of call waiting (in the Audiocodes), or
replace the analog phone with an IP phone (which does not need to do
signalling in band). Also, the analog phone needs to be able to handle
CLID with call waiting, but even so it'll have to mute the audio path to
send the info, so that won't solve the problem of the audio cutting out..
Jim
Andre Courchesne - Consultant wrote:
Hi again,
In the following architecture:
Asterisk server ----- Audiocode MP124 ----- Analog phone
When an analog phone is on the line and he gets a second call, there
is a loud blip on the line and a subsequent mush less loud one. My
customer is complaining about the first one because it cuts
conversation. The sound is more like a blip-chirp sound.
I tried playing with the audiocode configuration (which is very
limited) and with the asterisk indications.conf to no result. Any ideas?
Thanks,
Andre
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.173 / Virus Database: 270.8.2/1739 - Release Date: 10/22/2008 7:23 AM
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
