This is all set up via the web GUI in FreePBX.
1. You set up a SIP or IAX Trunk (if you don't have one already)
2. Create a CallBack (can choose to Call a fixed number or the CID of the Call
Back number after x secs)
3. Create a DISA (with return of dial tone if you need it)
4. Create an incoming route for the specific DID and CID combo of the trunk and
cell phone.
5. Have this incoming call route guided to your callback module
6. Have your CallBack module route the call to your DISA module
Takes about 2-3 munuites to set up
Call Flow:
416NXXXXXX --->CallBack--->
Hang-up--->10sec.delay--->CallBack(416NXXXXXX)--->answer
call--->DISA--Internal Dial tone ---> Dial-out as per outgoing dial
plan--->Hang-up (with possible return
to new DISA)
Using config files you will need to make sure you have the latest DISA and
Callback lib functions and that
your dial plan will trigger the Callback on a specific DID and CID combo (it's
a whole lot more work)
Hope this helps H
-----------------
Henry L. Coleman
[VoIP-PBX.ca]
=================
{ Dean Yorke}
> can you send me some config files.
>
> I have this kind of working, but it answers the call.
>
> Thanks
>
> On 1-Mar-09, at 9:49 PM, Henry L.Coleman wrote:
>
>> I have this up and running on my system PIAF with FreePBX Web GUI
>> It's great if you have a cell phone with an unlimited incoming plan.
>> You simply call your VoIP line number (DID) from your cell phone and
>> route
>> the call to do a "Call-Back" based on the CID (of your cell phone)
>> The * system doesn't answer the call so you won't get charged for
>> the call.
>> After 10 secs it calls me back with DISA dial tone. I can then dial
>> any number
>> I like at the VoIP call rate. The lastest version of FreePBX can
>> even return dial tone to make another
>> call without going through dialing a call back again.
>>
>> Trust me ..this one is very cool!
>> =================================
>> Henry L.Coleman [www.VoIP-PBX.ca]
>> Tel: 647-723-5160 Ext.203
>> =================================
>>
>>
>> { Bill Sandiford}
>>> Bruce:
>>>
>>> I certainly can't speak to what Comwave is using specifically, but
>>> there are many platforms out there that
>>> can offer this type of service (including Asterisk).
>>>
>>> Bill
>>>
>>> -----Original Message-----
>>> From: Bruce N [mailto:[email protected]]
>>> Sent: Sunday, March 01, 2009 6:40 PM
>>> To: asterisk Mailing
>>> Subject: [on-asterisk] Comwave Callback and Similar
>>>
>>>
>>> Hello Everyone,
>>>
>>> In the past few months Comwave has been advertising about a sort of
>>> CALLBACK/DISA combination for
>>> $20/month. Can anyone speculate as to what sort of equipment/
>>> solution they use to achieve their goal? Even
>>> if they sign up 100k clients that is still a lot of calls knowing
>>> every call is actually two calls going
>>> through their system and then bridged. Do they use an Asterisk SER
>>> farm? Do they use some propriety
>>> equipment like VPS, MERA, etc...?
>>>
>>> Listed:
>>> http://www.comwave.net/mobile/
>>>
>>> Thanks,
>>> Bruce
>>>
>>> _________________________________________________________________
>>> Share photos with friends on Windows Live Messenger
>>> http://go.microsoft.com/?linkid=9650734
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [email protected]
>>> For additional commands, e-mail: [email protected]
>>>
>>>
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [email protected]
>> For additional commands, e-mail: [email protected]
>>
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
