Yes, using analog lines is very different. With SIP or IAX lines you can grab
the CID and
remotely "block" the call, so the * system never has to answer the call and
hang-up. With analog lines you
have to go off-hook to go on-hook, or put another way you have to answer the
call before you can hang-up.
Don't forget that the analog telephone was a product of victorian thinking, in
their infinite wisdom they
assumed that in order to hang-up the phone one would have to be on the phone
first! :)
-----------------
Henry L. Coleman
[VoIP-PBX.ca]
=================
{ Dean Yorke}
> WEll, this is what i have but it doesn't hang up.
>
> I will try again. Also, I am using analogue lines, does that change it?
>
> On 2-Mar-09, at 9:26 AM, Henry L.Coleman wrote:
>
>> This is all set up via the web GUI in FreePBX.
>> 1. You set up a SIP or IAX Trunk (if you don't have one already)
>> 2. Create a CallBack (can choose to Call a fixed number or the CID
>> of the Call Back number after x secs)
>> 3. Create a DISA (with return of dial tone if you need it)
>> 4. Create an incoming route for the specific DID and CID combo of
>> the trunk and cell phone.
>> 5. Have this incoming call route guided to your callback module
>> 6. Have your CallBack module route the call to your DISA module
>>
>> Takes about 2-3 munuites to set up
>>
>> Call Flow:
>>
>> 416NXXXXXX --->CallBack---> Hang-up--->10sec.delay---
>> >CallBack(416NXXXXXX)--->answer
>> call--->DISA--Internal Dial tone ---> Dial-out as per outgoing dial
>> plan--->Hang-up (with possible return
>> to new DISA)
>>
>> Using config files you will need to make sure you have the latest
>> DISA and Callback lib functions and that
>> your dial plan will trigger the Callback on a specific DID and CID
>> combo (it's a whole lot more work)
>>
>> Hope this helps H
>>
>> -----------------
>> Henry L. Coleman
>> [VoIP-PBX.ca]
>>
>> =================
>>
>> { Dean Yorke}
>>> can you send me some config files.
>>>
>>> I have this kind of working, but it answers the call.
>>>
>>> Thanks
>>>
>>> On 1-Mar-09, at 9:49 PM, Henry L.Coleman wrote:
>>>
>>>> I have this up and running on my system PIAF with FreePBX Web GUI
>>>> It's great if you have a cell phone with an unlimited incoming plan.
>>>> You simply call your VoIP line number (DID) from your cell phone and
>>>> route
>>>> the call to do a "Call-Back" based on the CID (of your cell phone)
>>>> The * system doesn't answer the call so you won't get charged for
>>>> the call.
>>>> After 10 secs it calls me back with DISA dial tone. I can then dial
>>>> any number
>>>> I like at the VoIP call rate. The lastest version of FreePBX can
>>>> even return dial tone to make another
>>>> call without going through dialing a call back again.
>>>>
>>>> Trust me ..this one is very cool!
>>>> =================================
>>>> Henry L.Coleman [www.VoIP-PBX.ca]
>>>> Tel: 647-723-5160 Ext.203
>>>> =================================
>>>>
>>>>
>>>> { Bill Sandiford}
>>>>> Bruce:
>>>>>
>>>>> I certainly can't speak to what Comwave is using specifically, but
>>>>> there are many platforms out there that
>>>>> can offer this type of service (including Asterisk).
>>>>>
>>>>> Bill
>>>>>
>>>>> -----Original Message-----
>>>>> From: Bruce N [mailto:[email protected]]
>>>>> Sent: Sunday, March 01, 2009 6:40 PM
>>>>> To: asterisk Mailing
>>>>> Subject: [on-asterisk] Comwave Callback and Similar
>>>>>
>>>>>
>>>>> Hello Everyone,
>>>>>
>>>>> In the past few months Comwave has been advertising about a sort of
>>>>> CALLBACK/DISA combination for
>>>>> $20/month. Can anyone speculate as to what sort of equipment/
>>>>> solution they use to achieve their goal? Even
>>>>> if they sign up 100k clients that is still a lot of calls knowing
>>>>> every call is actually two calls going
>>>>> through their system and then bridged. Do they use an Asterisk SER
>>>>> farm? Do they use some propriety
>>>>> equipment like VPS, MERA, etc...?
>>>>>
>>>>> Listed:
>>>>> http://www.comwave.net/mobile/
>>>>>
>>>>> Thanks,
>>>>> Bruce
>>>>>
>>>>> _________________________________________________________________
>>>>> Share photos with friends on Windows Live Messenger
>>>>> http://go.microsoft.com/?linkid=9650734
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: [email protected]
>>>>> For additional commands, e-mail: [email protected]
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: [email protected]
>>>> For additional commands, e-mail: [email protected]
>>>>
>>>
>>>
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [email protected]
>> For additional commands, e-mail: [email protected]
>>
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
