Thanks for all the replies on the server recommendations - one thing I
am still unclear on, (and can't seem to get the info from Dell) - does
the PowerEdge 1950 have an additional 5v Molex connector for powering a
Sangoma FXS board?
I just came across this problem with a HP 2U server yesterday and ant to
avoid a repeat.
Thanks
Martin
Ken Brown wrote:
We're using an Dell R200 1U server here. All SIP so I can't answer to
Sangoma Compatibility.
It's configured with a pair of drives on a PERC 6 Raid controller setup for
RAID 1, and a relatively slow processor, a 1.6Ghz Celeron. I don't do much
transcoding and our 30 or so users barely warm the CPU up.
This is a "typical" SMB office use, with about 1/3 of the users off site.
No hot swap, but for us, taking it down after hours to swap a disk is not an
issue.
Ken
-----Original Message-----
From: Martin Glazer [mailto:[email protected]]
Sent: June 4, 2009 12:47 PM
To: Asterisk Users Group
Subject: [on-asterisk] Dell server recommendation?
Hi,
We normally used our own Intel based servers for Asterisk, however I
have someone looking for a Dell server to go with the rest of their
equipment.
The server will be used for a 50 person Asterisk installation with a
Sangoma dual PRI card.
Can anyone recommend a particular model of Dell server that they have
used consistently with Asterisk?
I know that a while back there were some issues with particular models
so I am curious what people have now?
Thanks
Martin
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.52/2153 - Release Date: 06/04/09
17:55:00
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
