Hello Martin,
Don't worry about the power connector...we can make our own :)
http://www.sangoma.com/products_and_solutions/hardware/specialty_tools.html
The "Power Adapter" allows us to pull a Molex connector off the PCIe
BUS. The board is 2U so you use the same slot for an A200.
*Thank-you,**
***
*Konrad Hammel, **B.ENG, **Software Engineer/Field Applications Engineer**
*Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON
L3R 9T3 Canada
t. 1 905 474 1990 x 118 | e. [email protected]
<mailto:[email protected]>_
_www.sangoma.com <http://www.sangoma.com/> | wiki.sangoma.com
<http://wiki.sangoma.com/>
*
*Lifetime Warranty.*** Because it must work!*
<http://www.tmcnet.com/voip/conference/>
Martin Glazer wrote:
Thanks for all the replies on the server recommendations - one thing I
am still unclear on, (and can't seem to get the info from Dell) - does
the PowerEdge 1950 have an additional 5v Molex connector for powering
a Sangoma FXS board?
I just came across this problem with a HP 2U server yesterday and ant
to avoid a repeat.
Thanks
Martin
Ken Brown wrote:
We're using an Dell R200 1U server here. All SIP so I can't answer to
Sangoma Compatibility.
It's configured with a pair of drives on a PERC 6 Raid controller
setup for
RAID 1, and a relatively slow processor, a 1.6Ghz Celeron. I don't do
much
transcoding and our 30 or so users barely warm the CPU up.
This is a "typical" SMB office use, with about 1/3 of the users off
site.
No hot swap, but for us, taking it down after hours to swap a disk is
not an
issue.
Ken
-----Original Message-----
From: Martin Glazer [mailto:[email protected]] Sent: June 4, 2009
12:47 PM
To: Asterisk Users Group
Subject: [on-asterisk] Dell server recommendation?
Hi,
We normally used our own Intel based servers for Asterisk, however I
have someone looking for a Dell server to go with the rest of their
equipment.
The server will be used for a 50 person Asterisk installation with a
Sangoma dual PRI card.
Can anyone recommend a particular model of Dell server that they have
used consistently with Asterisk?
I know that a while back there were some issues with particular
models so I am curious what people have now?
Thanks
Martin
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
No virus found in this incoming message.
Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database:
270.12.52/2153 - Release Date: 06/04/09
17:55:00
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
