Anyone have an example of a Norstar T1 -> Asterisk integration that supports DID and CLID?
I'm trying to do this via T1 and not PRI (as the PRI requires a $400 license from Nortel). I can call from the norstar to the asterisk with 9+ext it rings the Asterisk phone with no CLID. When I dial 9+ext on the asterisk as soon as it goes off hook on T1 line 1 it causes line one on the Norstar to ring. I would like to be able to dial different ext. (I'm not Norstar expert, I'm much more at home on Nortel M1 systems). I'm using a Sangoma T1/PRI card connected to a Norstar MICS Any suggestions would be appreciated. I have it "kind of working" with this config. Config - Zaptel.conf loadzone=us defaultzone=us #Sangoma A101 port 1 [slot:8 bus:2 span:1] <wanpipe1> span=1,0,0,esf,b8zs e&m=1-24 Zapata.conf [trunkgroups] [channels] language=en context=from-zaptel signalling=fxs_ks rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no ;echotraining=800 rxgain=0.0 txgain=0.0 group=0 callgroup=1 pickupgroup=1 immediate=no ;faxdetect=both faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no ;Include genzaptelconf configs #include zapata-auto.conf group=1 context=from-zaptel ;signalling=fxo_ls signalling=em_w channel => 1-24 ;immediate=yes ;Include AMP configs #include zapata_additional.conf Thanks Robert Brock Telecom Administrator, MKS Inc., www.mks.com<http://www.mks.com> Waterloo, ON, Canada Tel: 519-883-3243 or 800-265-2797 x3243 Fax: 519-884-8861
