I was able to do this using PRI and placing the Asterisk server
inbetween the telco and the Nortel
Telco PRI <---> Asterisk Server <---> Norstar
Also using a Sangoma card.
----
Andre Courchesne - Consultant
http://www.net-forces.com
MSN: [email protected]
Skype: VoipForces
L'information contenue dans le présent document est la propriété de
Andre Courchesne. Et est divulguée en toute confidentialité. Cette
information ne doit pas être utilisée, divulguée à d'autres personnes ou
reproduite sans le consentement écrit explicite de Andre Courchesne.
The information contained in this document is confidential and property
of Andre Courchesne. It shall not be used, disclosed to others or
reproduced without the express written consent of Andre Courchesne.
Robert Brock wrote:
Anyone have an example of a Norstar T1 -> Asterisk integration that supports
DID and CLID?
I'm trying to do this via T1 and not PRI (as the PRI requires a $400 license
from Nortel).
I can call from the norstar to the asterisk with 9+ext it rings the Asterisk
phone with no CLID. When I dial 9+ext on the asterisk as soon as it goes off
hook on T1 line 1 it causes line one on the Norstar to ring. I would like to be
able to dial different ext. (I'm not Norstar expert, I'm much more at home on
Nortel M1 systems).
I'm using a Sangoma T1/PRI card connected to a Norstar MICS
Any suggestions would be appreciated.
I have it "kind of working" with this config.
Config -
Zaptel.conf
loadzone=us
defaultzone=us
#Sangoma A101 port 1 [slot:8 bus:2 span:1] <wanpipe1>
span=1,0,0,esf,b8zs
e&m=1-24
Zapata.conf
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
;echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
context=from-zaptel
;signalling=fxo_ls
signalling=em_w
channel => 1-24
;immediate=yes
;Include AMP configs
#include zapata_additional.conf
Thanks
Robert Brock
Telecom Administrator, MKS Inc., www.mks.com<http://www.mks.com>
Waterloo, ON, Canada
Tel: 519-883-3243 or 800-265-2797 x3243
Fax: 519-884-8861
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
