To end a large chain :) for those interested in e911 details can be found here 
with many links and references...

http://en.wikipedia.org/wiki/Enhanced_911




-----Original Message-----
From: Bruce N [mailto:[email protected]]
Sent: Fri 4/9/2010 1:20 PM
To: [email protected]; Philip Mullis
Cc: [email protected]; asterisk Mailing; [email protected]
Subject: RE: [on-asterisk] E911 service provider
 

Interesting again. CRTC doesn't require location info as long as you have a 
Caller ID being passed?! Does this mean, no updates to psap are required by law?

 

 


 
> From: [email protected]
> To: [email protected]
> CC: [email protected]; [email protected]; [email protected]
> Date: Fri, 9 Apr 2010 10:42:54 -0500
> Subject: Re: [on-asterisk] E911 service provider
> 
> On Fri, 2010-04-09 at 11:16 -0400, Philip Mullis wrote:
> > There are a multitude of providers that offer this already and cheaply, 
> > (we off this to 3rd parties if needed)
> > other than that... there are many options for e911 some of which don't 
> > actually require sip trunking to a voip server (you can use your pri's). 
> > Its all about caller-id and ensuring the psap's have the customer 
> > did-address association setup correctly.
> 
> Just to be clear, if the device is a nomadic VOIP device, then sending
> calls direct to the PSAP is a violation of PSAP and CRTC regulations.
> 
> The call _MUST_ first go to a operator who will verbally determine the
> callers location before routing the call to the correct PSAP.
> 
> Location determination based on CallerID is not a CRTC requirement but
> all 3rd party 911 providers that I'm aware of use it as a backup.
> 
> Regards,
> -- 
> John Lange
> http://www.johnlange.ca
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
> 
                                          
_________________________________________________________________
Hotmail & Messenger are available on your phone. Try now.
http://go.microsoft.com/?linkid=9724461

Reply via email to