Segue um arquivo sample de config, que precisa ser compilado para se tornar o cfg para envio ao PAP2
# *** # *** Sipura SPA Series Configuration Parameters # *** # *** System Configuration Restricted_Access_Domains "" ; Enable_Web_Server "Yes" ; Web_Server_Port "80" ; Enable_Web_Admin_Access "Yes" ; Admin_Passwd "" ; User_Password ! "" ; # *** Internet Connection Type DHCP ! "Yes" ; Static_IP ! "" ; NetMask ! "" ; Gateway ! "" ; # *** Optional Network Configuration HostName ! "" ; Domain ! "" ; Primary_DNS ! "" ; Secondary_DNS ! "" ; DNS_Server_Order "Manual" ; # options: Manual/Manual,DHCP/DHCP,Manual DNS_Query_Mode "Parallel" ; # options: Parallel/Sequential Syslog_Server "" ; Debug_Server "" ; Debug_Level "0" ; # options: 0/1/2/3 Primary_NTP_Server "" ; Secondary_NTP_Server "" ; # *** Configuration Profile Provision_Enable "Yes" ; Resync_On_Reset "Yes" ; Resync_Random_Delay "2" ; Resync_Periodic "3600" ; Resync_Error_Retry_Delay "3600" ; Forced_Resync_Delay "14400" ; Resync_From_SIP "Yes" ; Resync_After_Upgrade_Attempt "Yes" ; Resync_Trigger_1 "" ; Resync_Trigger_2 "" ; Resync_Fails_On_FNF "Yes" ; Profile_Rule "/spa$PSN.cfg" ; Profile_Rule_B "" ; Profile_Rule_C "" ; Profile_Rule_D "" ; Log_Resync_Request_Msg "$PN $MAC -- Requesting resync $SCHEME://$SERVIP:$PORT$PATH" ; Log_Resync_Success_Msg "$PN $MAC -- Successful resync $SCHEME://$SERVIP:$PORT$PATH" ; Log_Resync_Failure_Msg "$PN $MAC -- Resync failed: $ERR" ; Report_Rule "" ; # *** Firmware Upgrade Upgrade_Enable "Yes" ; Upgrade_Error_Retry_Delay "3600" ; Downgrade_Rev_Limit "" ; Upgrade_Rule "" ; Log_Upgrade_Request_Msg "$PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH" ; Log_Upgrade_Success_Msg "$PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH -- $ERR" ; Log_Upgrade_Failure_Msg "$PN $MAC -- Upgrade failed: $ERR" ; # *** General Purpose Parameters GPP_A "" ; GPP_B "" ; GPP_C "" ; GPP_D "" ; GPP_E "" ; GPP_F "" ; GPP_G "" ; GPP_H "" ; GPP_I "" ; GPP_J "" ; GPP_K "" ; GPP_L "" ; GPP_M "" ; GPP_N "" ; GPP_O "" ; GPP_P "" ; GPP_SA "" ; GPP_SB "" ; GPP_SC "" ; GPP_SD "" ; # *** SIP Parameters Max_Forward "70" ; Max_Redirection "5" ; Max_Auth "2" ; SIP_User_Agent_Name "$VERSION" ; SIP_Server_Name "$VERSION" ; SIP_Accept_Language "" ; DTMF_Relay_MIME_Type "application/dtmf-relay" ; Hook_Flash_MIME_Type "application/hook-flash" ; Remove_Last_Reg "No" ; Use_Compact_Header "No" ; # *** SIP Timer Values (sec) SIP_T1 ".5" ; SIP_T2 "4" ; SIP_T4 "5" ; SIP_Timer_B "32" ; SIP_Timer_F "32" ; SIP_Timer_H "32" ; SIP_Timer_D "32" ; SIP_Timer_J "32" ; INVITE_Expires "240" ; ReINVITE_Expires "30" ; Reg_Min_Expires "1" ; Reg_Max_Expires "7200" ; Reg_Retry_Intvl "30" ; Reg_Retry_Long_Intvl "1200" ; # *** Response Status Code Handling SIT1_RSC "" ; SIT2_RSC "" ; SIT3_RSC "" ; SIT4_RSC "" ; Try_Backup_RSC "" ; Retry_Reg_RSC "" ; # *** RTP Parameters RTP_Port_Min "16384" ; RTP_Port_Max "16482" ; RTP_Packet_Size "0.030" ; Max_RTP_ICMP_Err "0" ; RTCP_Tx_Interval "0" ; # *** SDP Payload Types NSE_Dynamic_Payload "100" ; AVT_Dynamic_Payload "101" ; INFOREQ_Dynamic_Payload "" ; G726r16_Dynamic_Payload "98" ; G726r24_Dynamic_Payload "97" ; G726r40_Dynamic_Payload "96" ; G729b_Dynamic_Payload "99" ; NSE_Codec_Name "NSE" ; AVT_Codec_Name "telephone-event" ; G711u_Codec_Name "PCMU" ; G711a_Codec_Name "PCMA" ; G726r16_Codec_Name "G726-16" ; G726r24_Codec_Name "G726-24" ; G726r32_Codec_Name "G726-32" ; G726r40_Codec_Name "G726-40" ; G729a_Codec_Name "G729a" ; G729b_Codec_Name "G729ab" ; G723_Codec_Name "G723" ; # *** NAT Support Parameters Handle_VIA_received "No" ; Handle_VIA_rport "No" ; Insert_VIA_received "No" ; Insert_VIA_rport "No" ; Substitute_VIA_Addr "No" ; Send_Resp_To_Src_Port "No" ; STUN_Enable "No" ; STUN_Test_Enable "No" ; STUN_Server "" ; EXT_IP "" ; EXT_RTP_Port_Min "" ; NAT_Keep_Alive_Intvl "15" ; # *** Line_Enable[1] "Yes" ; # *** Streaming Audio Server (SAS) SAS_Enable[1] "No" ; SAS_DLG_Refresh_Intvl[1] "30" ; SAS_Inbound_RTP_Sink[1] "" ; # *** NAT Settings NAT_Mapping_Enable[1] "No" ; NAT_Keep_Alive_Enable[1] "No" ; NAT_Keep_Alive_Msg[1] "$NOTIFY" ; NAT_Keep_Alive_Dest[1] "$PROXY" ; # *** Network Settings SIP_TOS/DiffServ_Value[1] "0x68" ; Network_Jitter_Level[1] "high" ; # options: low/medium/high/very high RTP_TOS/DiffServ_Value[1] "0xb8" ; # *** SIP Settings SIP_Port[1] "5060" ; SIP_100REL_Enable[1] "No" ; EXT_SIP_Port[1] "" ; Auth_Resync-Reboot[1] "Yes" ; SIP_Debug_Option[1] "none" ; # options: none/1-line/1-line excl. OPT/1-line excl. NTFY/1-line excl. REG/1-line excl. OPT|NTFY|REG/full/full excl. OPT/full excl. NTFY/full excl. REG/full excl. OPT|NTFY|REG RTP_Log_Intvl[1] "0" ; # *** Call Feature Settings Blind_Attn-Xfer_Enable[1] "No" ; MOH_Server[1] "" ; Xfer_When_Hangup_Conf[1] "Yes" ; # *** Proxy and Registration Proxy[1] "" ; Use_Outbound_Proxy[1] "No" ; Outbound_Proxy[1] "" ; Use_OB_Proxy_In_Dialog[1] "Yes" ; Register[1] "Yes" ; Make_Call_Without_Reg[1] "No" ; Register_Expires[1] "3600" ; Ans_Call_Without_Reg[1] "No" ; Use_DNS_SRV[1] "No" ; DNS_SRV_Auto_Prefix[1] "No" ; Proxy_Fallback_Intvl[1] "3600" ; # *** Subscriber Information Display_Name[1] "" ; User_ID[1] "" ; Password[1] "" ; Use_Auth_ID[1] "No" ; Auth_ID[1] "" ; Mini_Certificate[1] "" ; SRTP_Private_Key[1] "" ; # *** Supplementary Service Subscription Call_Waiting_Serv[1] "Yes" ; Block_CID_Serv[1] "Yes" ; Block_ANC_Serv[1] "Yes" ; Dist_Ring_Serv[1] "Yes" ; Cfwd_All_Serv[1] "Yes" ; Cfwd_Busy_Serv[1] "Yes" ; Cfwd_No_Ans_Serv[1] "Yes" ; Cfwd_Sel_Serv[1] "Yes" ; Cfwd_Last_Serv[1] "Yes" ; Block_Last_Serv[1] "Yes" ; Accept_Last_Serv[1] "Yes" ; DND_Serv[1] "Yes" ; CID_Serv[1] "Yes" ; CWCID_Serv[1] "Yes" ; Call_Return_Serv[1] "Yes" ; Call_Back_Serv[1] "Yes" ; Three_Way_Call_Serv[1] "Yes" ; Three_Way_Conf_Serv[1] "Yes" ; Attn_Transfer_Serv[1] "Yes" ; Unattn_Transfer_Serv[1] "Yes" ; MWI_Serv[1] "Yes" ; VMWI_Serv[1] "Yes" ; Speed_Dial_Serv[1] "Yes" ; Secure_Call_Serv[1] "Yes" ; Referral_Serv[1] "Yes" ; Feature_Dial_Serv[1] "Yes" ; # *** Audio Configuration Preferred_Codec[1] "G711u" ; # options: G711u/G711a/G726-16/G726-24/G726-32/G726-40/G729a/G723 Silence_Supp_Enable[1] "No" ; Use_Pref_Codec_Only[1] "No" ; Silence_Threshold[1] "medium" ; # options: high/medium/low G729a_Enable[1] "Yes" ; Echo_Canc_Enable[1] "Yes" ; G723_Enable[1] "Yes" ; Echo_Canc_Adapt_Enable[1] "Yes" ; G726-16_Enable[1] "Yes" ; Echo_Supp_Enable[1] "Yes" ; G726-24_Enable[1] "Yes" ; FAX_CED_Detect_Enable[1] "Yes" ; G726-32_Enable[1] "Yes" ; FAX_CNG_Detect_Enable[1] "Yes" ; G726-40_Enable[1] "Yes" ; FAX_Passthru_Codec[1] "G711u" ; # options: G711u/G711a DTMF_Process_INFO[1] "Yes" ; FAX_Codec_Symmetric[1] "Yes" ; DTMF_Process_AVT[1] "Yes" ; FAX_Passthru_Method[1] "NSE" ; # options: None/NSE/ReINVITE DTMF_Tx_Method[1] "Auto" ; # options: InBand/AVT/INFO/Auto/InBand+INFO/AVT+INFO FAX_Process_NSE[1] "Yes" ; Hook_Flash_Tx_Method[1] "None" ; # options: None/AVT/INFO Release_Unused_Codec[1] "Yes" ; # *** Dial Plan Dial_Plan[1] "(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)" ; Enable_IP_Dialing[1] "No" ; # *** FXS Port Polarity Configuration Idle_Polarity[1] "Forward" ; # options: Forward/Reverse Caller_Conn_Polarity[1] "Forward" ; # options: Forward/Reverse Callee_Conn_Polarity[1] "Forward" ; # options: Forward/Reverse # *** Call Forward Settings Cfwd_All_Dest[1] ! "" ; Cfwd_Busy_Dest[1] ! "" ; Cfwd_No_Ans_Dest[1] ! "" ; Cfwd_No_Ans_Delay[1] ! "20" ; # *** Selective Call Forward Settings Cfwd_Sel1_Caller[1] ! "" ; Cfwd_Sel1_Dest[1] ! "" ; Cfwd_Sel2_Caller[1] ! "" ; Cfwd_Sel2_Dest[1] ! "" ; Cfwd_Sel3_Caller[1] ! "" ; Cfwd_Sel3_Dest[1] ! "" ; Cfwd_Sel4_Caller[1] ! "" ; Cfwd_Sel4_Dest[1] ! "" ; Cfwd_Sel5_Caller[1] ! "" ; Cfwd_Sel5_Dest[1] ! "" ; Cfwd_Sel6_Caller[1] ! "" ; Cfwd_Sel6_Dest[1] ! "" ; Cfwd_Sel7_Caller[1] ! "" ; Cfwd_Sel7_Dest[1] ! "" ; Cfwd_Sel8_Caller[1] ! "" ; Cfwd_Sel8_Dest[1] ! "" ; Cfwd_Last_Caller[1] ! "" ; Cfwd_Last_Dest[1] ! "" ; Block_Last_Caller[1] ! "" ; Accept_Last_Caller[1] ! "" ; # *** Speed Dial Settings Speed_Dial_2[1] ! "" ; Speed_Dial_3[1] ! "" ; Speed_Dial_4[1] ! "" ; Speed_Dial_5[1] ! "" ; Speed_Dial_6[1] ! "" ; Speed_Dial_7[1] ! "" ; Speed_Dial_8[1] ! "" ; Speed_Dial_9[1] ! "" ; # *** Supplementary Service Settings CW_Setting[1] ! "Yes" ; Block_CID_Setting[1] ! "No" ; Block_ANC_Setting[1] ! "No" ; DND_Setting[1] ! "No" ; CID_Setting[1] ! "Yes" ; CWCID_Setting[1] ! "Yes" ; Dist_Ring_Setting[1] ! "Yes" ; Secure_Call_Setting[1] "No" ; Message_Waiting[1] ! "No" ; # *** Distinctive Ring Settings Ring1_Caller[1] ! "" ; Ring2_Caller[1] ! "" ; Ring3_Caller[1] ! "" ; Ring4_Caller[1] ! "" ; Ring5_Caller[1] ! "" ; Ring6_Caller[1] ! "" ; Ring7_Caller[1] ! "" ; Ring8_Caller[1] ! "" ; # *** Ring Settings Default_Ring[1] ! "1" ; # options: 1/2/3/4/5/6/7/8 Default_CWT[1] ! "1" ; # options: 1/2/3/4/5/6/7/8 Hold_Reminder_Ring[1] ! "8" ; # options: 1/2/3/4/5/6/7/8/none Call_Back_Ring[1] ! "7" ; # options: 1/2/3/4/5/6/7/8 Cfwd_Ring_Splash_Len[1] ! "0" ; Cblk_Ring_Splash_Len[1] ! "0" ; VMWI_Ring_Splash_Len[1] ! ".5" ; VMWI_Ring_Policy[1] "New VM Available" ; # options: New VM Available/New VM Becomes Available/New VM Arrives Ring_On_No_New_VM[1] "No" ; # *** Line_Enable[2] "Yes" ; # *** Streaming Audio Server (SAS) SAS_Enable[2] "No" ; SAS_DLG_Refresh_Intvl[2] "30" ; SAS_Inbound_RTP_Sink[2] "" ; # *** NAT Settings NAT_Mapping_Enable[2] "No" ; NAT_Keep_Alive_Enable[2] "No" ; NAT_Keep_Alive_Msg[2] "$NOTIFY" ; NAT_Keep_Alive_Dest[2] "$PROXY" ; # *** Network Settings SIP_TOS/DiffServ_Value[2] "0x68" ; Network_Jitter_Level[2] "high" ; # options: low/medium/high/very high RTP_TOS/DiffServ_Value[2] "0xb8" ; # *** SIP Settings SIP_Port[2] "5061" ; SIP_100REL_Enable[2] "No" ; EXT_SIP_Port[2] "" ; Auth_Resync-Reboot[2] "Yes" ; SIP_Debug_Option[2] "none" ; # options: none/1-line/1-line excl. OPT/1-line excl. NTFY/1-line excl. REG/1-line excl. OPT|NTFY|REG/full/full excl. OPT/full excl. NTFY/full excl. REG/full excl. OPT|NTFY|REG RTP_Log_Intvl[2] "0" ; # *** Call Feature Settings Blind_Attn-Xfer_Enable[2] "No" ; MOH_Server[2] "" ; Xfer_When_Hangup_Conf[2] "Yes" ; # *** Proxy and Registration Proxy[2] "" ; Use_Outbound_Proxy[2] "No" ; Outbound_Proxy[2] "" ; Use_OB_Proxy_In_Dialog[2] "Yes" ; Register[2] "Yes" ; Make_Call_Without_Reg[2] "No" ; Register_Expires[2] "3600" ; Ans_Call_Without_Reg[2] "No" ; Use_DNS_SRV[2] "No" ; DNS_SRV_Auto_Prefix[2] "No" ; Proxy_Fallback_Intvl[2] "3600" ; # *** Subscriber Information Display_Name[2] "" ; User_ID[2] "" ; Password[2] "" ; Use_Auth_ID[2] "No" ; Auth_ID[2] "" ; Mini_Certificate[2] "" ; SRTP_Private_Key[2] "" ; # *** Supplementary Service Subscription Call_Waiting_Serv[2] "Yes" ; Block_CID_Serv[2] "Yes" ; Block_ANC_Serv[2] "Yes" ; Dist_Ring_Serv[2] "Yes" ; Cfwd_All_Serv[2] "Yes" ; Cfwd_Busy_Serv[2] "Yes" ; Cfwd_No_Ans_Serv[2] "Yes" ; Cfwd_Sel_Serv[2] "Yes" ; Cfwd_Last_Serv[2] "Yes" ; Block_Last_Serv[2] "Yes" ; Accept_Last_Serv[2] "Yes" ; DND_Serv[2] "Yes" ; CID_Serv[2] "Yes" ; CWCID_Serv[2] "Yes" ; Call_Return_Serv[2] "Yes" ; Call_Back_Serv[2] "Yes" ; Three_Way_Call_Serv[2] "Yes" ; Three_Way_Conf_Serv[2] "Yes" ; Attn_Transfer_Serv[2] "Yes" ; Unattn_Transfer_Serv[2] "Yes" ; MWI_Serv[2] "Yes" ; VMWI_Serv[2] "Yes" ; Speed_Dial_Serv[2] "Yes" ; Secure_Call_Serv[2] "Yes" ; Referral_Serv[2] "Yes" ; Feature_Dial_Serv[2] "Yes" ; # *** Audio Configuration Preferred_Codec[2] "G711u" ; # options: G711u/G711a/G726-16/G726-24/G726-32/G726-40/G729a/G723 Silence_Supp_Enable[2] "No" ; Use_Pref_Codec_Only[2] "No" ; Silence_Threshold[2] "medium" ; # options: high/medium/low G729a_Enable[2] "Yes" ; Echo_Canc_Enable[2] "Yes" ; G723_Enable[2] "Yes" ; Echo_Canc_Adapt_Enable[2] "Yes" ; G726-16_Enable[2] "Yes" ; Echo_Supp_Enable[2] "Yes" ; G726-24_Enable[2] "Yes" ; FAX_CED_Detect_Enable[2] "Yes" ; G726-32_Enable[2] "Yes" ; FAX_CNG_Detect_Enable[2] "Yes" ; G726-40_Enable[2] "Yes" ; FAX_Passthru_Codec[2] "G711u" ; # options: G711u/G711a DTMF_Process_INFO[2] "Yes" ; FAX_Codec_Symmetric[2] "Yes" ; DTMF_Process_AVT[2] "Yes" ; FAX_Passthru_Method[2] "NSE" ; # options: None/NSE/ReINVITE DTMF_Tx_Method[2] "Auto" ; # options: InBand/AVT/INFO/Auto/InBand+INFO/AVT+INFO FAX_Process_NSE[2] "Yes" ; Hook_Flash_Tx_Method[2] "None" ; # options: None/AVT/INFO Release_Unused_Codec[2] "Yes" ; # *** Dial Plan Dial_Plan[2] "(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)" ; Enable_IP_Dialing[2] "No" ; # *** FXS Port Polarity Configuration Idle_Polarity[2] "Forward" ; # options: Forward/Reverse Caller_Conn_Polarity[2] "Forward" ; # options: Forward/Reverse Callee_Conn_Polarity[2] "Forward" ; # options: Forward/Reverse # *** Call Forward Settings Cfwd_All_Dest[2] ! "" ; Cfwd_Busy_Dest[2] ! "" ; Cfwd_No_Ans_Dest[2] ! "" ; Cfwd_No_Ans_Delay[2] ! "20" ; # *** Selective Call Forward Settings Cfwd_Sel1_Caller[2] ! "" ; Cfwd_Sel1_Dest[2] ! "" ; Cfwd_Sel2_Caller[2] ! "" ; Cfwd_Sel2_Dest[2] ! "" ; Cfwd_Sel3_Caller[2] ! "" ; Cfwd_Sel3_Dest[2] ! "" ; Cfwd_Sel4_Caller[2] ! "" ; Cfwd_Sel4_Dest[2] ! "" ; Cfwd_Sel5_Caller[2] ! "" ; Cfwd_Sel5_Dest[2] ! "" ; Cfwd_Sel6_Caller[2] ! "" ; Cfwd_Sel6_Dest[2] ! "" ; Cfwd_Sel7_Caller[2] ! "" ; Cfwd_Sel7_Dest[2] ! "" ; Cfwd_Sel8_Caller[2] ! "" ; Cfwd_Sel8_Dest[2] ! "" ; Cfwd_Last_Caller[2] ! "" ; Cfwd_Last_Dest[2] ! "" ; Block_Last_Caller[2] ! "" ; Accept_Last_Caller[2] ! "" ; # *** Speed Dial Settings Speed_Dial_2[2] ! "" ; Speed_Dial_3[2] ! "" ; Speed_Dial_4[2] ! "" ; Speed_Dial_5[2] ! "" ; Speed_Dial_6[2] ! "" ; Speed_Dial_7[2] ! "" ; Speed_Dial_8[2] ! "" ; Speed_Dial_9[2] ! "" ; # *** Supplementary Service Settings CW_Setting[2] ! "Yes" ; Block_CID_Setting[2] ! "No" ; Block_ANC_Setting[2] ! "No" ; DND_Setting[2] ! "No" ; CID_Setting[2] ! "Yes" ; CWCID_Setting[2] ! "Yes" ; Dist_Ring_Setting[2] ! "Yes" ; Secure_Call_Setting[2] "No" ; Message_Waiting[2] ! "No" ; # *** Distinctive Ring Settings Ring1_Caller[2] ! "" ; Ring2_Caller[2] ! "" ; Ring3_Caller[2] ! "" ; Ring4_Caller[2] ! "" ; Ring5_Caller[2] ! "" ; Ring6_Caller[2] ! "" ; Ring7_Caller[2] ! "" ; Ring8_Caller[2] ! "" ; # *** Ring Settings Default_Ring[2] ! "1" ; # options: 1/2/3/4/5/6/7/8 Default_CWT[2] ! "1" ; # options: 1/2/3/4/5/6/7/8 Hold_Reminder_Ring[2] ! "8" ; # options: 1/2/3/4/5/6/7/8/none Call_Back_Ring[2] ! "7" ; # options: 1/2/3/4/5/6/7/8 Cfwd_Ring_Splash_Len[2] ! "0" ; Cblk_Ring_Splash_Len[2] ! "0" ; VMWI_Ring_Splash_Len[2] ! ".5" ; VMWI_Ring_Policy[2] "New VM Available" ; # options: New VM Available/New VM Becomes Available/New VM Arrives Ring_On_No_New_VM[2] "No" ; # *** Call Progress Tones Dial_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED];10(*/0/1+2)" ; Second_Dial_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED];10(*/0/1+2)" ; Outside_Dial_Tone "[EMAIL PROTECTED];10(*/0/1)" ; Prompt_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED];10(*/0/1+2)" ; Busy_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED];10(.5/.5/1+2)" ; Reorder_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED];10(.25/.25/1+2)" ; Off_Hook_Warning_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED];10(.125/.125/1+2)" ; Ring_Back_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED];*(2/4/1+2)" ; Confirm_Tone "[EMAIL PROTECTED];1(.25/.25/1)" ; SIT1_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED];20(.380/0/1,.380/0/2,.380/0/3,0/4/0)" ; SIT2_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED];20(.274/0/1,.274/0/2,.380/0/3,0/4/0)" ; SIT3_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED];20(.380/0/1,.380/0/2,.380/0/3,0/4/0)" ; SIT4_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED];20(.380/0/1,.274/0/2,.380/0/3,0/4/0)" ; MWI_Dial_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED];2(.1/.1/1+2);10(*/0/1+2)" ; Cfwd_Dial_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED];2(.2/.2/1+2);10(*/0/1+2)" ; Holding_Tone "[EMAIL PROTECTED];*(.1/.1/1,.1/.1/1,.1/9.5/1)" ; Conference_Tone "[EMAIL PROTECTED];20(.1/.1/1,.1/9.7/1)" ; Secure_Call_Indication_Tone "[EMAIL PROTECTED],[EMAIL PROTECTED];15(0/2/0,.2/.1/1,.1/2.1/2)" ; # *** Distinctive Ring Patterns Ring1_Cadence "60(2/4)" ; Ring2_Cadence "60(.3/.2,1/.2,.3/4)" ; Ring3_Cadence "60(.8/.4,.8/4)" ; Ring4_Cadence "60(.4/.2,.3/.2,.8/4)" ; Ring5_Cadence "60(.2/.2,.2/.2,.2/.2,1/4)" ; Ring6_Cadence "60(.2/.4,.2/.4,.2/4)" ; Ring7_Cadence "60(.4/.2,.4/.2,.4/4)" ; Ring8_Cadence "60(0.25/9.75)" ; # *** Distinctive Call Waiting Tone Patterns CWT1_Cadence "30(.3/9.7)" ; CWT2_Cadence "30(.1/.1, .1/9.7)" ; CWT3_Cadence "30(.1/.1, .3/.1, .1/9.3)" ; CWT4_Cadence "30(.1/.1,.1/.1,.1/9.5)" ; CWT5_Cadence "30(.3/.1,.1/.1,.3/9.1)" ; CWT6_Cadence "30(.1/.1,.3/.2,.3/9.1)" ; CWT7_Cadence "30(.3/.1,.3/.1,.1/9.1)" ; CWT8_Cadence "2.3(.3/2)" ; # *** Distinctive Ring/CWT Pattern Names Ring1_Name "Bellcore-r1" ; Ring2_Name "Bellcore-r2" ; Ring3_Name "Bellcore-r3" ; Ring4_Name "Bellcore-r4" ; Ring5_Name "Bellcore-r5" ; Ring6_Name "Bellcore-r6" ; Ring7_Name "Bellcore-r7" ; Ring8_Name "Bellcore-r8" ; # *** Ring and Call Waiting Tone Spec Ring_Waveform "Sinusoid" ; # options: Sinusoid/Trapezoid Ring_Frequency "25" ; Ring_Voltage "70" ; CWT_Frequency "[EMAIL PROTECTED]" ; # *** Control Timer Values (sec) Hook_Flash_Timer_Min ".1" ; Hook_Flash_Timer_Max ".9" ; Callee_On_Hook_Delay "0" ; Reorder_Delay "5" ; Call_Back_Expires "1800" ; Call_Back_Retry_Intvl "30" ; Call_Back_Delay ".5" ; VMWI_Refresh_Intvl "0" ; Interdigit_Long_Timer "10" ; Interdigit_Short_Timer "3" ; CPC_Delay "2" ; CPC_Duration "0" ; # *** Vertical Service Activation Codes Call_Return_Code "*69" ; Blind_Transfer_Code "*98" ; Call_Back_Act_Code "*66" ; Call_Back_Deact_Code "*86" ; Cfwd_All_Act_Code "*72" ; Cfwd_All_Deact_Code "*73" ; Cfwd_Busy_Act_Code "*90" ; Cfwd_Busy_Deact_Code "*91" ; Cfwd_No_Ans_Act_Code "*92" ; Cfwd_No_Ans_Deact_Code "*93" ; Cfwd_Last_Act_Code "*63" ; Cfwd_Last_Deact_Code "*83" ; Block_Last_Act_Code "*60" ; Block_Last_Deact_Code "*80" ; Accept_Last_Act_Code "*64" ; Accept_Last_Deact_Code "*84" ; CW_Act_Code "*56" ; CW_Deact_Code "*57" ; CW_Per_Call_Act_Code "*71" ; CW_Per_Call_Deact_Code "*70" ; Block_CID_Act_Code "*67" ; Block_CID_Deact_Code "*68" ; Block_CID_Per_Call_Act_Code "*81" ; Block_CID_Per_Call_Deact_Code "*82" ; Block_ANC_Act_Code "*77" ; Block_ANC_Deact_Code "*87" ; DND_Act_Code "*78" ; DND_Deact_Code "*79" ; CID_Act_Code "*65" ; CID_Deact_Code "*85" ; CWCID_Act_Code "*25" ; CWCID_Deact_Code "*45" ; Dist_Ring_Act_Code "*26" ; Dist_Ring_Deact_Code "*46" ; Speed_Dial_Act_Code "*74" ; Secure_All_Call_Act_Code "*16" ; Secure_No_Call_Act_Code "*17" ; Secure_One_Call_Act_Code "*18" ; Secure_One_Call_Deact_Code "*19" ; Conference_Act_Code "" ; Attn-Xfer_Act_Code "" ; Referral_Services_Codes "" ; Feature_Dial_Services_Codes "" ; # *** Outbound Call Codec Selection Codes Prefer_G711u_Code "*017110" ; Force_G711u_Code "*027110" ; Prefer_G711a_Code "*017111" ; Force_G711a_Code "*027111" ; Prefer_G723_Code "*01723" ; Force_G723_Code "*02723" ; Prefer_G726r16_Code "*0172616" ; Force_G726r16_Code "*0272616" ; Prefer_G726r24_Code "*0172624" ; Force_G726r24_Code "*0272624" ; Prefer_G726r32_Code "*0172632" ; Force_G726r32_Code "*0272632" ; Prefer_G726r40_Code "*0172640" ; Force_G726r40_Code "*0272640" ; Prefer_G729a_Code "*01729" ; Force_G729a_Code "*02729" ; # *** Miscellaneous Set_Local_Date_(mm/dd) "" ; Set_Local_Time_(HH/mm) "" ; Time_Zone "GMT-07:00" ; # options: GMT-12:00/GMT-11:00/GMT-10:00/GMT-09:00/GMT-08:00/GMT-07:00/GMT-06:00/GMT-05:00/GMT-04:00/GMT-03:30/GMT-03:00/GMT-02:00/GMT-01:00/GMT/GMT+01:00/GMT+02:00/GMT+03:00/GMT+03:30/GMT+04:00/GMT+05:00/GMT+05:30/GMT+05:45/GMT+06:00/GMT+06:30/GMT+07:00/GMT+08:00/GMT+09:00/GMT+09:30/GMT+10:00/GMT+11:00/GMT+12:00/GMT+13:00 FXS_Port_Impedance "600" ; # options: 600/900/600+2.16uF/900+2.16uF/270+750||150nF/220+820||120nF/220+820||115nF/370+620||310nF FXS_Port_Input_Gain "-3" ; FXS_Port_Output_Gain "-3" ; DTMF_Playback_Level "-16" ; DTMF_Playback_Length ".1" ; Detect_ABCD "Yes" ; Playback_ABCD "Yes" ; Caller_ID_Method "Bellcore(N.Amer,China)" ; # options: Bellcore(N.Amer,China)/DTMF(Finland,Sweden)/DTMF(Denmark)/ETSI DTMF/ETSI DTMF With PR/ETSI DTMF After Ring/ETSI FSK/ETSI FSK With PR(UK) FXS_Port_Power_Limit "3" ; # options: 1/2/3/4/5/6/7/8 Protect_IVR_FactoryReset "No" ; ----- Original Message ----- From: Henrique Petry Rauber To: asteriskbrasil@listas.asteriskbrasil.org Sent: Friday, October 03, 2008 3:05 PM Subject: Re: [AsteriskBrasil] configurar PAP2 em escala Alguém possui o arquivo pap2.cfg para realizar o provisionmento?? Quero conifgurar vários atas de uma vez enviando o arquivo de configuração para o ata. Porém não sei como montar o arquivo para enviar para o ata.. obrigado. _______________________________________________ Compre uma camiseta da AsteriskBrasil.org! http://www.voipmania.com.br Acesse o canal IRC de discussão sobre Asterisk em Português Brasileiro na rede Freenode.net: #asterisk-br _______________________________________________ Lista de discussões AsteriskBrasil.org AsteriskBrasil@listas.asteriskbrasil.org http://listas.asteriskbrasil.org/mailman/listinfo/asteriskbrasil _______________________________________________ Compre uma camiseta da AsteriskBrasil.org! http://www.voipmania.com.br Acesse o canal IRC de discussão sobre Asterisk em Português Brasileiro na rede Freenode.net: #asterisk-br _______________________________________________ Lista de discussões AsteriskBrasil.org AsteriskBrasil@listas.asteriskbrasil.org http://listas.asteriskbrasil.org/mailman/listinfo/asteriskbrasil