com essa configuração no dongle.conf: [dongle0] ;audio=/dev/ttyUSB2 ; tty port for audio connection; no default value ;data=/dev/ttyUSB3 ; tty port for AT commands; no default value
ele não acha o dongle. sip*CLI> dongle show devices ID Group State RSSI Mode Submode Provider Name Model Firmware IMEI IMSI Number dongle0 0 Not connec 0 0 0 NONE Unknown 2013/4/15 Everton Carneiro <[email protected]> > dongle unload chan_dongle.so > dongle load chan_dongle.so > > > 2013/4/15 Otavio Asterisk <[email protected]> > >> Vou testar agora! >> Uma pergunta besta: alterando essas configs no dongle.conf, basta dar um >> *dongle reload now* no CLI? >> >> >> 2013/4/15 Everton Carneiro <[email protected]> >> >>> tenta comentando: >>> ;audio=/dev/ttyUSB2 ; tty port for audio >>> connection; no default value >>> >>> ;data=/dev/ttyUSB3 ; tty port for AT >>> commands; no default value >>> e coloca somente o imei >>> >>> >>> >>> 2013/4/15 Otavio Asterisk <[email protected]> >>> >>>> praticamente default, alterei apenas o número da usb, e o meu imei e >>>> imsi. >>>> >>>> [general] >>>> >>>> interval=15 ; Number of seconds between trying to >>>> connect to devices >>>> >>>> ;------------------------------ JITTER BUFFER CONFIGURATION >>>> -------------------------- >>>> ;jbenable = yes ; Enables the use of a jitterbuffer on >>>> the receiving side of a >>>> ; Dongle channel. Defaults to "no". An >>>> enabled jitterbuffer will >>>> ; be used only if the sending side can >>>> create and the receiving >>>> ; side can not accept jitter. The >>>> Dongle channel can't accept jitter, >>>> ; thus an enabled jitterbuffer on the >>>> receive Dongle side will always >>>> ; be used if the sending side can >>>> create jitter. >>>> >>>> ;jbforce = no ; Forces the use of a jitterbuffer on >>>> the receive side of a Dongle >>>> ; channel. Defaults to "no". >>>> >>>> ;jbmaxsize = 200 ; Max length of the jitterbuffer in >>>> milliseconds. >>>> >>>> ;jbresyncthreshold = 1000 ; Jump in the frame timestamps over >>>> which the jitterbuffer is >>>> ; resynchronized. Useful to improve the >>>> quality of the voice, with >>>> ; big jumps in/broken timestamps, >>>> usually sent from exotic devices >>>> ; and programs. Defaults to 1000. >>>> >>>> ;jbimpl = fixed ; Jitterbuffer implementation, used on >>>> the receiving side of a Dongle >>>> ; channel. Two implementations are >>>> currently available - "fixed" >>>> ; (with size always equals to >>>> jbmaxsize) and "adaptive" (with >>>> ; variable size, actually the new jb of >>>> IAX2). Defaults to fixed. >>>> >>>> ;jbtargetextra = 40 ; This option only affects the jb when >>>> 'jbimpl = adaptive' is set. >>>> ; The option represents the number of >>>> milliseconds by which the new jitter buffer >>>> ; will pad its size. the default is 40, >>>> so without modification, the new >>>> ; jitter buffer will set its size to >>>> the jitter value plus 40 milliseconds. >>>> ; increasing this value may help if >>>> your network normally has low jitter, >>>> ; but occasionally has spikes. >>>> >>>> ;jblog = no ; Enables jitterbuffer frame logging. >>>> Defaults to "no". >>>> >>>> ;----------------------------------------------------------------------------------- >>>> >>>> [defaults] >>>> ; now you can set here any not required device settings as template >>>> ; sure you can overwrite in any [device] section this default values >>>> >>>> context=from-pstn ; context for incoming calls >>>> group=0 ; calling group >>>> rxgain=0 ; increase the incoming volume; may be >>>> negative >>>> txgain=0 ; increase the outgoint volume; may be >>>> negative >>>> autodeletesms=yes ; auto delete incoming sms >>>> resetdongle=yes ; reset dongle during initialization >>>> with ATZ command >>>> u2diag=-1 ; set ^U2DIAG parameter on device (0 = >>>> disable everything except modem function) ; -1 not use ^U2DIAG command >>>> usecallingpres=yes ; use the caller ID presentation or not >>>> callingpres=allowed_passed_screen ; set caller ID presentation >>>> by default use default network settings >>>> disablesms=no ; disable of SMS reading from device >>>> when received >>>> ; chan_dongle has currently a bug with >>>> SMS reception. When a SMS gets in during a >>>> ; call chan_dongle might crash. Enable >>>> this option to disable sms reception. >>>> ; default = no >>>> >>>> language=en ; set channel default language >>>> smsaspdu=yes ; if 'yes' send SMS in PDU mode, >>>> feature implementation incomplete and we strongly recommend say 'yes' >>>> mindtmfgap=45 ; minimal interval from end of previews >>>> DTMF from begining of next in ms >>>> mindtmfduration=80 ; minimal DTMF tone duration in ms >>>> mindtmfinterval=200 ; minimal interval between ends of DTMF >>>> of same digits in ms >>>> >>>> callwaiting=auto ; if 'yes' allow incoming calls >>>> waiting; by default use network settings >>>> ; if 'no' waiting calls just ignored >>>> disable=no ; OBSOLETED by initstate: if 'yes' no >>>> load this device and just ignore this section >>>> >>>> initstate=start ; specified initial state of device, >>>> must be one of 'stop' 'start' 'remote' >>>> ; 'remove' same as 'disable=yes' >>>> >>>> exten=+1234567890 ; exten for start incoming calls, only >>>> in case of Subscriber Number not available!, also set to CALLERID(ndid) >>>> >>>> dtmf=relax ; control of incoming DTMF detection, >>>> possible values: >>>> ; off - off DTMF tones detection, >>>> voice data passed to asterisk unaltered >>>> ; use this value for >>>> gateways or if not use DTMF for AVR or inside dialplan >>>> ; inband - do DTMF tones detection >>>> ; relax - like inband but with >>>> relaxdtmf option >>>> ; default is 'relax' by compatibility >>>> reason >>>> >>>> ; dongle required settings >>>> [dongle0] >>>> audio=/dev/ttyUSB2 ; tty port for audio connection; >>>> no default value >>>> data=/dev/ttyUSB3 ; tty port for AT commands; >>>> no default value >>>> >>>> ; or you can omit both audio and data together and use >>>> imei=123456789012345 and/or imsi=123456789012345 >>>> ; imei and imsi must contain exactly 15 digits ! >>>> ; imei/imsi discovery is available on Linux only >>>> imei=XXXXXXXXXXXXXXX >>>> imsi=XXXXXXXXXXXXXXX >>>> >>>> ; if audio and data set together with imei and/or imsi audio and data >>>> has precedence >>>> ; you can use both imei and imsi together in this case exact match by >>>> imei and imsi required >>>> >>>> >>>> >>>> >>>> Em 15 de abril de 2013 15:41, Everton Carneiro < >>>> [email protected]> escreveu: >>>> >>>> como esta o aquivo dongle.conf? >>>>> >>>>> >>>>> Em 15 de abril de 2013 15:36, Otavio Asterisk < >>>>> [email protected]> escreveu: >>>>> >>>>>> Lista, boa tarde. >>>>>> Consegui subir o modem, consigo realizar e receber ligações, no >>>>>> entanto, qnd ligo através do modem, a pessoa q me atende não ouve nada, >>>>>> apenas um chiado e alto e um pouco da minha voz metalizada. O mesmo >>>>>> ocorre >>>>>> qnd ligo para o chip q está no modem: ouço a ura do meu pabx toda >>>>>> metalizada e com muito chiado de fundo. >>>>>> Alguém já passou por isso ou tem alguma dica? >>>>>> Abraço a todos! >>>>>> >>>>>> -- >>>>>> Otávio >>>>>> >>>>>> _______________________________________________ >>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>>>> www.Khomp.com. >>>>>> _______________________________________________ >>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>>>> www.digivoice.com.br >>>>>> _______________________________________________ >>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>>>> _______________________________________________ >>>>>> Para remover seu email desta lista, basta enviar um email em branco >>>>>> para [email protected] >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> *Everton Carneiro .:* >>>>> *Visão Tecnologia >>>>> * >>>>> *Fortaleza-CE 85-3044 8888 / 3044-8844 >>>>> * >>>>> *Cel: Tim 85-9665 0888 >>>>> * >>>>> >>>>> Preserve o verde, antes de imprimir veja se realmente é necessário. >>>>> >>>>> _______________________________________________ >>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>>> www.Khomp.com. >>>>> _______________________________________________ >>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>>> www.digivoice.com.br >>>>> _______________________________________________ >>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>>> _______________________________________________ >>>>> Para remover seu email desta lista, basta enviar um email em branco >>>>> para [email protected] >>>>> >>>> >>>> >>>> >>>> -- >>>> Otávio >>>> >>>> _______________________________________________ >>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>> www.Khomp.com. >>>> _______________________________________________ >>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>> www.digivoice.com.br >>>> _______________________________________________ >>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>> _______________________________________________ >>>> Para remover seu email desta lista, basta enviar um email em branco >>>> para [email protected] >>>> >>> >>> >>> >>> -- >>> *Everton Carneiro .:* >>> *Visão Tecnologia >>> * >>> *Fortaleza-CE 85-3044 8888 / 3044-8844 >>> * >>> *Cel: Tim 85-9665 0888 >>> * >>> >>> Preserve o verde, antes de imprimir veja se realmente é necessário. >>> >>> _______________________________________________ >>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>> www.Khomp.com. >>> _______________________________________________ >>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>> www.digivoice.com.br >>> _______________________________________________ >>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>> _______________________________________________ >>> Para remover seu email desta lista, basta enviar um email em branco para >>> [email protected] >>> >> >> >> >> -- >> Otávio >> >> _______________________________________________ >> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >> Intercomunicadores para acesso remoto via rede IP. Conheça em >> www.Khomp.com. >> _______________________________________________ >> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >> Centro Treinamento - Curso de PABX IP - Asterisk - Site >> www.digivoice.com.br >> _______________________________________________ >> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >> _______________________________________________ >> Para remover seu email desta lista, basta enviar um email em branco para >> [email protected] >> > > > > -- > *Everton Carneiro .:* > *Visão Tecnologia > * > *Fortaleza-CE 85-3044 8888 / 3044-8844 > * > *Cel: Tim 85-9665 0888 > * > > Preserve o verde, antes de imprimir veja se realmente é necessário. > > _______________________________________________ > KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; > Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; > Intercomunicadores para acesso remoto via rede IP. Conheça em > www.Khomp.com. > _______________________________________________ > DIGIVOICE Fabricante de Placas de Voz e Channel Bank > 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM > Centro Treinamento - Curso de PABX IP - Asterisk - Site > www.digivoice.com.br > _______________________________________________ > ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. > Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. > Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. > _______________________________________________ > Para remover seu email desta lista, basta enviar um email em branco para > [email protected] > -- Otávio
_______________________________________________ KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; Intercomunicadores para acesso remoto via rede IP. Conheça em www.Khomp.com. _______________________________________________ DIGIVOICE Fabricante de Placas de Voz e Channel Bank 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM Centro Treinamento - Curso de PABX IP - Asterisk - Site www.digivoice.com.br _______________________________________________ ALIGERA Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. Channel Bank Appliance Asterisk - Acesse www.aligera.com.br. _______________________________________________ Para remover seu email desta lista, basta enviar um email em branco para [email protected]
