e / ou imei, imsi coloca só o imei
2013/4/15 Otavio Asterisk <[email protected]> > O imei estava logo abaixo no arquivo, só comentei as linhas citadas: > > > [dongle0] > ;audio=/dev/ttyUSB2 ; tty port for audio connection; > no default value > ;data=/dev/ttyUSB3 ; tty port for AT commands; > no default value > > ; or you can omit both audio and data together and use > imei=123456789012345 and/or imsi=123456789012345 > ; imei and imsi must contain exactly 15 digits ! > ; imei/imsi discovery is available on Linux only > imei=3586XXXXXXXXXXX > imsi=7241XXXXXXXXXXX > > > > 2013/4/15 Everton Carneiro <[email protected]> > >> você usa elastix se sim levante o asterisk com root. >> >> >> 2013/4/15 Otavio Asterisk <[email protected]> >> >>> com essa configuração no dongle.conf: >>> >>> >>> [dongle0] >>> ;audio=/dev/ttyUSB2 ; tty port for audio connection; >>> no default value >>> ;data=/dev/ttyUSB3 ; tty port for AT commands; >>> no default value >>> >>> ele não acha o dongle. >>> >>> sip*CLI> dongle show devices >>> ID Group State RSSI Mode Submode Provider Name >>> Model Firmware IMEI IMSI Number >>> dongle0 0 Not connec 0 0 0 >>> NONE >>> Unknown >>> >>> >>> >>> 2013/4/15 Everton Carneiro <[email protected]> >>> >>>> dongle unload chan_dongle.so >>>> dongle load chan_dongle.so >>>> >>>> >>>> 2013/4/15 Otavio Asterisk <[email protected]> >>>> >>>>> Vou testar agora! >>>>> Uma pergunta besta: alterando essas configs no dongle.conf, basta dar >>>>> um *dongle reload now* no CLI? >>>>> >>>>> >>>>> 2013/4/15 Everton Carneiro <[email protected]> >>>>> >>>>>> tenta comentando: >>>>>> ;audio=/dev/ttyUSB2 ; tty port for audio >>>>>> connection; no default value >>>>>> >>>>>> ;data=/dev/ttyUSB3 ; tty port for AT >>>>>> commands; no default value >>>>>> e coloca somente o imei >>>>>> >>>>>> >>>>>> >>>>>> 2013/4/15 Otavio Asterisk <[email protected]> >>>>>> >>>>>>> praticamente default, alterei apenas o número da usb, e o meu imei e >>>>>>> imsi. >>>>>>> >>>>>>> [general] >>>>>>> >>>>>>> interval=15 ; Number of seconds between trying >>>>>>> to connect to devices >>>>>>> >>>>>>> ;------------------------------ JITTER BUFFER CONFIGURATION >>>>>>> -------------------------- >>>>>>> ;jbenable = yes ; Enables the use of a jitterbuffer >>>>>>> on the receiving side of a >>>>>>> ; Dongle channel. Defaults to "no". >>>>>>> An enabled jitterbuffer will >>>>>>> ; be used only if the sending side >>>>>>> can create and the receiving >>>>>>> ; side can not accept jitter. The >>>>>>> Dongle channel can't accept jitter, >>>>>>> ; thus an enabled jitterbuffer on >>>>>>> the receive Dongle side will always >>>>>>> ; be used if the sending side can >>>>>>> create jitter. >>>>>>> >>>>>>> ;jbforce = no ; Forces the use of a jitterbuffer >>>>>>> on the receive side of a Dongle >>>>>>> ; channel. Defaults to "no". >>>>>>> >>>>>>> ;jbmaxsize = 200 ; Max length of the jitterbuffer in >>>>>>> milliseconds. >>>>>>> >>>>>>> ;jbresyncthreshold = 1000 ; Jump in the frame timestamps over >>>>>>> which the jitterbuffer is >>>>>>> ; resynchronized. Useful to improve >>>>>>> the quality of the voice, with >>>>>>> ; big jumps in/broken timestamps, >>>>>>> usually sent from exotic devices >>>>>>> ; and programs. Defaults to 1000. >>>>>>> >>>>>>> ;jbimpl = fixed ; Jitterbuffer implementation, used >>>>>>> on the receiving side of a Dongle >>>>>>> ; channel. Two implementations are >>>>>>> currently available - "fixed" >>>>>>> ; (with size always equals to >>>>>>> jbmaxsize) and "adaptive" (with >>>>>>> ; variable size, actually the new jb >>>>>>> of IAX2). Defaults to fixed. >>>>>>> >>>>>>> ;jbtargetextra = 40 ; This option only affects the jb >>>>>>> when 'jbimpl = adaptive' is set. >>>>>>> ; The option represents the number >>>>>>> of milliseconds by which the new jitter buffer >>>>>>> ; will pad its size. the default is >>>>>>> 40, so without modification, the new >>>>>>> ; jitter buffer will set its size to >>>>>>> the jitter value plus 40 milliseconds. >>>>>>> ; increasing this value may help if >>>>>>> your network normally has low jitter, >>>>>>> ; but occasionally has spikes. >>>>>>> >>>>>>> ;jblog = no ; Enables jitterbuffer frame >>>>>>> logging. Defaults to "no". >>>>>>> >>>>>>> ;----------------------------------------------------------------------------------- >>>>>>> >>>>>>> [defaults] >>>>>>> ; now you can set here any not required device settings as template >>>>>>> ; sure you can overwrite in any [device] section this default >>>>>>> values >>>>>>> >>>>>>> context=from-pstn ; context for incoming calls >>>>>>> group=0 ; calling group >>>>>>> rxgain=0 ; increase the incoming volume; may >>>>>>> be negative >>>>>>> txgain=0 ; increase the outgoint volume; may >>>>>>> be negative >>>>>>> autodeletesms=yes ; auto delete incoming sms >>>>>>> resetdongle=yes ; reset dongle during initialization >>>>>>> with ATZ command >>>>>>> u2diag=-1 ; set ^U2DIAG parameter on device (0 >>>>>>> = disable everything except modem function) ; -1 not use ^U2DIAG command >>>>>>> usecallingpres=yes ; use the caller ID presentation or >>>>>>> not >>>>>>> callingpres=allowed_passed_screen ; set caller ID >>>>>>> presentation by default use default network settings >>>>>>> disablesms=no ; disable of SMS reading from device >>>>>>> when received >>>>>>> ; chan_dongle has currently a bug >>>>>>> with SMS reception. When a SMS gets in during a >>>>>>> ; call chan_dongle might crash. >>>>>>> Enable this option to disable sms reception. >>>>>>> ; default = no >>>>>>> >>>>>>> language=en ; set channel default language >>>>>>> smsaspdu=yes ; if 'yes' send SMS in PDU mode, >>>>>>> feature implementation incomplete and we strongly recommend say 'yes' >>>>>>> mindtmfgap=45 ; minimal interval from end of >>>>>>> previews DTMF from begining of next in ms >>>>>>> mindtmfduration=80 ; minimal DTMF tone duration in ms >>>>>>> mindtmfinterval=200 ; minimal interval between ends of >>>>>>> DTMF of same digits in ms >>>>>>> >>>>>>> callwaiting=auto ; if 'yes' allow incoming calls >>>>>>> waiting; by default use network settings >>>>>>> ; if 'no' waiting calls just ignored >>>>>>> disable=no ; OBSOLETED by initstate: if 'yes' >>>>>>> no load this device and just ignore this section >>>>>>> >>>>>>> initstate=start ; specified initial state of device, >>>>>>> must be one of 'stop' 'start' 'remote' >>>>>>> ; 'remove' same as 'disable=yes' >>>>>>> >>>>>>> exten=+1234567890 ; exten for start incoming calls, >>>>>>> only in case of Subscriber Number not available!, also set to >>>>>>> CALLERID(ndid) >>>>>>> >>>>>>> dtmf=relax ; control of incoming DTMF >>>>>>> detection, possible values: >>>>>>> ; off - off DTMF tones >>>>>>> detection, voice data passed to asterisk unaltered >>>>>>> ; use this value for >>>>>>> gateways or if not use DTMF for AVR or inside dialplan >>>>>>> ; inband - do DTMF tones detection >>>>>>> ; relax - like inband but with >>>>>>> relaxdtmf option >>>>>>> ; default is 'relax' by >>>>>>> compatibility reason >>>>>>> >>>>>>> ; dongle required settings >>>>>>> [dongle0] >>>>>>> audio=/dev/ttyUSB2 ; tty port for audio >>>>>>> connection; no default value >>>>>>> data=/dev/ttyUSB3 ; tty port for AT >>>>>>> commands; no default value >>>>>>> >>>>>>> ; or you can omit both audio and data together and use >>>>>>> imei=123456789012345 and/or imsi=123456789012345 >>>>>>> ; imei and imsi must contain exactly 15 digits ! >>>>>>> ; imei/imsi discovery is available on Linux only >>>>>>> imei=XXXXXXXXXXXXXXX >>>>>>> imsi=XXXXXXXXXXXXXXX >>>>>>> >>>>>>> ; if audio and data set together with imei and/or imsi audio and >>>>>>> data has precedence >>>>>>> ; you can use both imei and imsi together in this case exact match >>>>>>> by imei and imsi required >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Em 15 de abril de 2013 15:41, Everton Carneiro < >>>>>>> [email protected]> escreveu: >>>>>>> >>>>>>> como esta o aquivo dongle.conf? >>>>>>>> >>>>>>>> >>>>>>>> Em 15 de abril de 2013 15:36, Otavio Asterisk < >>>>>>>> [email protected]> escreveu: >>>>>>>> >>>>>>>>> Lista, boa tarde. >>>>>>>>> Consegui subir o modem, consigo realizar e receber ligações, no >>>>>>>>> entanto, qnd ligo através do modem, a pessoa q me atende não ouve >>>>>>>>> nada, >>>>>>>>> apenas um chiado e alto e um pouco da minha voz metalizada. O mesmo >>>>>>>>> ocorre >>>>>>>>> qnd ligo para o chip q está no modem: ouço a ura do meu pabx toda >>>>>>>>> metalizada e com muito chiado de fundo. >>>>>>>>> Alguém já passou por isso ou tem alguma dica? >>>>>>>>> Abraço a todos! >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Otávio >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>>>>>>> www.Khomp.com. >>>>>>>>> _______________________________________________ >>>>>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>>>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>>>>>>> www.digivoice.com.br >>>>>>>>> _______________________________________________ >>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e >>>>>>>>> SS7. >>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>>>>>>> _______________________________________________ >>>>>>>>> Para remover seu email desta lista, basta enviar um email em >>>>>>>>> branco para [email protected] >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> *Everton Carneiro .:* >>>>>>>> *Visão Tecnologia >>>>>>>> * >>>>>>>> *Fortaleza-CE 85-3044 8888 / 3044-8844 >>>>>>>> * >>>>>>>> *Cel: Tim 85-9665 0888 >>>>>>>> * >>>>>>>> >>>>>>>> Preserve o verde, antes de imprimir veja se realmente é >>>>>>>> necessário. >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>>>>>> www.Khomp.com. >>>>>>>> _______________________________________________ >>>>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>>>>>> www.digivoice.com.br >>>>>>>> _______________________________________________ >>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e >>>>>>>> SS7. >>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>>>>>> _______________________________________________ >>>>>>>> Para remover seu email desta lista, basta enviar um email em branco >>>>>>>> para [email protected] >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Otávio >>>>>>> >>>>>>> _______________________________________________ >>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>>>>> www.Khomp.com. >>>>>>> _______________________________________________ >>>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>>>>> www.digivoice.com.br >>>>>>> _______________________________________________ >>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>>>>> _______________________________________________ >>>>>>> Para remover seu email desta lista, basta enviar um email em branco >>>>>>> para [email protected] >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> *Everton Carneiro .:* >>>>>> *Visão Tecnologia >>>>>> * >>>>>> *Fortaleza-CE 85-3044 8888 / 3044-8844 >>>>>> * >>>>>> *Cel: Tim 85-9665 0888 >>>>>> * >>>>>> >>>>>> Preserve o verde, antes de imprimir veja se realmente é necessário. >>>>>> >>>>>> _______________________________________________ >>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>>>> www.Khomp.com. >>>>>> _______________________________________________ >>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>>>> www.digivoice.com.br >>>>>> _______________________________________________ >>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>>>> _______________________________________________ >>>>>> Para remover seu email desta lista, basta enviar um email em branco >>>>>> para [email protected] >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Otávio >>>>> >>>>> _______________________________________________ >>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>>> www.Khomp.com. >>>>> _______________________________________________ >>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>>> www.digivoice.com.br >>>>> _______________________________________________ >>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>>> _______________________________________________ >>>>> Para remover seu email desta lista, basta enviar um email em branco >>>>> para [email protected] >>>>> >>>> >>>> >>>> >>>> -- >>>> *Everton Carneiro .:* >>>> *Visão Tecnologia >>>> * >>>> *Fortaleza-CE 85-3044 8888 / 3044-8844 >>>> * >>>> *Cel: Tim 85-9665 0888 >>>> * >>>> >>>> Preserve o verde, antes de imprimir veja se realmente é necessário. >>>> >>>> _______________________________________________ >>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>> www.Khomp.com. >>>> _______________________________________________ >>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>> www.digivoice.com.br >>>> _______________________________________________ >>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>> _______________________________________________ >>>> Para remover seu email desta lista, basta enviar um email em branco >>>> para [email protected] >>>> >>> >>> >>> >>> -- >>> Otávio >>> >>> _______________________________________________ >>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>> www.Khomp.com. >>> _______________________________________________ >>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>> www.digivoice.com.br >>> _______________________________________________ >>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>> _______________________________________________ >>> Para remover seu email desta lista, basta enviar um email em branco para >>> [email protected] >>> >> >> >> >> -- >> *Everton Carneiro .:* >> *Visão Tecnologia >> * >> *Fortaleza-CE 85-3044 8888 / 3044-8844 >> * >> *Cel: Tim 85-9665 0888 >> * >> >> Preserve o verde, antes de imprimir veja se realmente é necessário. >> >> _______________________________________________ >> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >> Intercomunicadores para acesso remoto via rede IP. Conheça em >> www.Khomp.com. >> _______________________________________________ >> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >> Centro Treinamento - Curso de PABX IP - Asterisk - Site >> www.digivoice.com.br >> _______________________________________________ >> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >> _______________________________________________ >> Para remover seu email desta lista, basta enviar um email em branco para >> [email protected] >> > > > > -- > Otávio > > _______________________________________________ > KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; > Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; > Intercomunicadores para acesso remoto via rede IP. Conheça em > www.Khomp.com. > _______________________________________________ > DIGIVOICE Fabricante de Placas de Voz e Channel Bank > 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM > Centro Treinamento - Curso de PABX IP - Asterisk - Site > www.digivoice.com.br > _______________________________________________ > ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. > Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. > Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. > _______________________________________________ > Para remover seu email desta lista, basta enviar um email em branco para > [email protected] > -- *Everton Carneiro .:* *Visão Tecnologia * *Fortaleza-CE 85-3044 8888 / 3044-8844 * *Cel: Tim 85-9665 0888 * Preserve o verde, antes de imprimir veja se realmente é necessário.
_______________________________________________ KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; Intercomunicadores para acesso remoto via rede IP. Conheça em www.Khomp.com. _______________________________________________ DIGIVOICE Fabricante de Placas de Voz e Channel Bank 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM Centro Treinamento - Curso de PABX IP - Asterisk - Site www.digivoice.com.br _______________________________________________ ALIGERA Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. Channel Bank Appliance Asterisk - Acesse www.aligera.com.br. _______________________________________________ Para remover seu email desta lista, basta enviar um email em branco para [email protected]
