Canuck15 wrote: > I phoned Soekris and the main guy (heavy accent) told me that the JP10 > connector will supply 12v to the Sangoma molex connector. Of course > there is always the possibility we had a miscommunication. Can anyone > confirm or deny? > > I phoned Sangoma and the tech told me that Sangoma FXS ports require > 100ma per port during ringing which comes from the 12v connected to > the molex connector. That is 200ma per 2 port module while both are > ringing simultaneously. If your not getting a lot of simultaneous > ringing or it's all outbound then I don't think you need much power. > That is the impression I got in my discussion with the Sangoma tech > but he sounded like a low level tech and had to ask someone else a > couple times. It would be nice to confirm these facts as well. > >
Even if you could get the power requirements it would be impossible (far beyond impossible) to handle the echo cancellation requirements of that board in software (native Zaptel echo can). -- Kristian Kielhofner ********************************************* It is my understanding that you need about 30Mhz per channel for software echo can. I figure 2 or 3 channels at most but that's it. I just assumed that I would need to use the hardware echo can option after that. Hopefully someone can do some testing before I have to actually buy the stuff and do it myself. _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
