Thanks for the quick reply, Kristian! Right now it's blank, but I did have wcfxo in there, but didn't know if my X100p card was causing the problems...
Should I have something? -Rich On Fri, 8 Sep 2006, Kristian Kielhofner wrote: > Richard D Alloway wrote: >> Hi! >> >> I'm trying to get TDMoE up and running and it appears that the AstLinux >> ethernet interface is not sending out any packets, regardless of interface >> used, timing settings or signalling method. >> >> I do get errors like: >> >> Span: ZTD/eth/eth0/00:01:02:49:8e:45/0: Expected message size 24, but was 44 >> instead. >> >> The other * box is also running zaptel 1.2.7 (Pound Key Linux 1.1.1). >> >> I am receiving the 1000 pkts/sec from the Pound Key box. >> >> Pound Key /etc/zaptel.conf: >> >> loadzone = us >> defaultzone=us >> dynamic=eth,eth0/00:0C:42:03:30:22/0,2,0 >> bchan=1 >> dchan=2 >> >> AstLinux /etc/zaptel.conf: >> loadzone = us >> defaultzone = us >> dynamic=eth,eth0/00:01:02:49:8e:45/0,2,1 >> bchan=1 >> dchan=2 >> >> I've verified the MAC addresses numerous times. It just seems that the >> AstLinux box will not send packets to build the TDMoE link. >> >> Any help would be appreciated! >> >> Thanks! >> >> -Rich > > Rich, > > What do you have ZAPMODS set to in rc.conf? > > -- > Kristian Kielhofner > _______________________________________________ > Astlinux-users mailing list > [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to [EMAIL > PROTECTED] > _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
