The card has been designed from the ground up, and the only queues we've taken were in writing our module to be Zaptel compliant. I too have the R4FXO working on AstLinux, though I haven't submitted to Kris yet because it's not "pretty" yet.
Regards, Bryce Chidester Rhino Equipment Corp. [EMAIL PROTECTED] SIP: [EMAIL PROTECTED] +1 (480) 940-1826 x6351 IAX: [EMAIL PROTECTED] x6351 +1 (800) 785-7073 x6351 FWD: 633686 x6351 THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the email and its attachments from all computers. On Sep 11, 2006, at 09:52, Nathan C. Smith wrote: > Larry > > Thanks for the update. > > Is the Rhino card truly different then? Not rebranded Sangoma or > Digium? > > -Nate > > -----Original Message----- > From: Larry Shields [mailto:[EMAIL PROTECTED] > Sent: Monday, September 11, 2006 11:42 AM > To: [EMAIL PROTECTED] > Subject: [Astlinux-users] Rhino Quad FXO Analog PCI Plug-In Card > (R4FXO) - > installed > > > All, > > I received the new Rhino R4FXO card last week. The card was > installed in a > small form factor VIA EPIA Nehemiah with 1GHz cpu motherboard. I > have been > very interested in this card based on it's specifications, small > form factor > and price point. > > In addition this card offers the option of an echo cancellation > module. The > echo cancellation module is a daughtercard based on the Octasic echo > cancellation chip ( http://www.octasic.com/en/tech/ > echo_cancel.php ). I have > not ordered or tested the echo can module at this time, but like > the fact > that the option is available if PSTN connectivity circumstances > call for it. > > The card came packaged with nice product manual and driver CD. After > sliding the card into the riser card in my chassis I began the > process of > creating a new AstLinux image with Rhino support turned on. I used > the > 0.4.3 development branch that offered Asterisk 1.2.10 and Zaptel > 1.2.7. > This was fine because the current driver release with zaptel patch > is based > on Zaptel 1.2.7. > _______________________________________________ > Astlinux-users mailing list > [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [EMAIL PROTECTED] > _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
