Hello Is your LAN card onboard or ofboard? Did you noticed if it shares the IRQ line with any other device on your computer?
Does your TDM/X100P cards have dedicated IRQ lines for each one? Do you have any other IRQ hungry hardware on your computer? From what I've learn by lurking asterisk users list, these are big sources of problems to PCI FX? ports with asterisk. That's why I decided to go offboard (I use an old VIP 400 H323 device with 4 FXO ports where I hook a cellsocket and two POTS lines) instead of a TDM or a bunch of X100Ps. Hope this helps, Cheers !3runo Barry Fawthrop wrote: > I have been using Asterisk for 2 1/2 years now in a std PC Initially > with a X100p and TDM400p (with FXS module) [The original Development Kit] > > I have always had an echo problem , or poor voice quality > I have 3 snom 200 connected using SIP and an SIP VoIP Provider > I accept calls on the X100p and based on routing bridge the call to an > analog phone on the TDM or to IP Phones > > I recently got 2 FXO Modules, removed the X100p and now have the TDM400p > with (FXS, spare , FXO , FXO) Still I have quality issues. _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
