Ingmar, Thanks again for answering. I did remove the toolchain directory and it was still putting the patch files in for 457. I cleared out toolchain again reran svn to update the project to 459. I find the patches back in the directory again.
Thanks again for your help. -----Original Message----- From: Ingmar Schraub [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 15, 2006 2:55 AM To: Discussion of AstLinux - Asterisk on Compact Flash Subject: Re: [Astlinux-users] uClibc Hi Tony, yes, I was using trunk revision 457. I built for i586/net4801. After checking out that revision and running straight away 'make' I had a problem with uClibc. I could solve it by removing the toolchain build directory. uClibc was build again - properly, no patching required. I don't know if it makes a difference if you build for i586 or i686. Either you try it out or maybe Kristian can enlighten us ;-) Regarding the config file & questions: the questions are normal if there are new options to select. You could i.e. run once make menuconfig and just exit/save. regards, Ingmar Tony Plack wrote: > Ingmar, I removed the toolchain_build_i686 and still get the same > message. > > I am running revision 457 and it brings in the uClib patches still. > > I am finding the trunk enabling the 686 by default (which is fine by > me) and you stated 586, are you sure you have the latest trunk? > > Still an issue, and removing the patches physically seems the only > bypass. If you wait till it fails, you need to remove the reject files > as well. > > In addition, the config files are still not correct because of the > number of questions MAKE kicks back out to the console. > _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
